The new Optisonic 7300 Biogas ultrasonic flowmeter from Krohne has been specially designed to measure dry and wet biogas with variable composition. The meter provides additional functions, like calculation of standard volume, methane content measurement, and diagnostics features. It also features no moving parts and no pressure loss.
The new instrument overcomes the limitations of the ultrasonic principle in biogas applications due to high damping of the acoustic signals by carbon dioxide and high water content in the biogas. Its signal transducers provide a stronger ultrasonic signal into the gas, and specialised signal processing enables better detection of small, strongly dampened acoustic signals. These features, along with the mechanical design of transducers and transducer pockets, make the measurement insensitive to liquid and biological scaling.
It features a maintenance-free full bore flow sensor without any moving parts. Because the hydrogen sulphide (H2S) in biogas is corrosive when dissolved in water, the measuring tube is made of stainless steel 1.4404/316L and the transducers are made of Nace-approved grade 29 titanium for maximum corrosion resistance. Equipped with lap joint flanges to lower its overall weight, the measurement accuracy is specified at 1 percent of actual measured flow rate, when calibrated with air. When 2 percent accuracy is sufficient, users can select a dry calibration alternative at a significantly lower price.
Optisonic 7300 Biogas features a built-in temperature sensor that facilitates direct measurement of methane content using calculation of the molar mass, in combination with the measured velocity of sound. This enables end-users to determine the exact methane content of the biogas, necessary when it is used as fuel for gas engines in a combined heat and power (CHP) unit. It can also provide calculation of gas flow volume to standard conditions by using an additional pressure sensor. The electronics include diagnostics to validate the flowmeter functions and the process. For output of the measured values, 4-20 mA and pulse outputs are available, while HART and Modbus (optional) are included for field communication.
The instrument is certified for use in explosive areas (Zone 1). Since no pressure drop is generally allowed in biogas pipelines, the device is available in common line sizes of 2, 3, 4, 6 and 8 inches.
Radiometric density measurements Mecosa
Flow Measurement & Control
Radiometric density measurements are used wherever conventional measurement techniques fail. Successful applications can be found in a wide variety of industries, especially where harsh process environments and difficult measuring conditions prevail.
Read more...Battery-powered magmeter
Flow Measurement & Control
The RWEM/D battery-powered electromagnetic flow meter from Royce Water Systems is ideal for water and wastewater systems located at remote sites.
Read more...Precise process and maximum savings with VEGABAR VEGA Controls SA
Flow Measurement & Control
Accurate measurementsof differential pressure is crucial for safety, efficiency and optimising operational processes. For over 40 years, VEGA has supplied industry-leading pressure measurement solutions, establishing itself as a trusted expert with a proven track record in sensor technology.
Read more...Innovative solutions for low flow dosing with high precision Mecosa
Flow Measurement & Control
n the food, pharma, and chemical manufacturing industries, precision and efficiency are of utmost importance. Bronkhorst High-Tech has developed a flexible solution that meets today’s requirements for highly accurate dosing, whether continuous, in ratio, or in batches.
Read more...Battery-powered magmeter
Flow Measurement & Control
The RWEM/D battery-powered electromagnetic flow meter from Royce Water Systems is ideal for water and wastewater systems located at remote sites.
Read more...Smart technology for municipal services VEGA Controls SA
Flow Measurement & Control
A new wave of smart technologies has emerged from VEGA Instruments, promising a revolutionary impact on the efficiency and dependability of municipal services.
Read more...KROHNE reaches important milestone in Ethernet-APL KROHNE
Fieldbus & Industrial Networking
In December 2023, KROHNE made Ethernet-APL demo devices available to selected customers. This step marks an important milestone in the company’s own Ethernet APL development project for various sensor types. Ethernet-APL technology is a revolution in the process industry.
Read more...Sustainable journey with hydrogen Mecosa
Flow Measurement & Control
Bronkhorst High-Tech, the Dutch leader in flow measurement and control, has been focusing on hydrogen applications in the renewable energy market for some time, and for good reason.
Read more...Wireless communication system for remote access to data KROHNE
Data Acquisition & Telemetry
KROHNE has introduced the OPTIBRIDGE 3880 IIoT data logger for remote data services, acquisition and evaluation. It is a fully autonomous battery- or mains- powered wireless communication system for remote access to measurement data.
Read more...Optimise sludge treatment and reduce operational costs Endress+Hauser South Africa
Flow Measurement & Control
The Endress+Hauser inline measuring devices, the Proline Teqwave MW 300 and the Proline Teqwave MW 500, determine the total solids content of wastewater directly through microwave transmission.
printer friendly version