Flow Measurement & Control


Clearly visible flow measurement

November 2018 Flow Measurement & Control

To check the flow processes in pipeline systems and for insight into the interior of process pipes, many flow indicators are used in which the flowing medium sets a rotor turning and thus, to a large extent, visibly signals a flow. The special feature of Kobold’s special version, Type DAA, is that the rotor is housed in a glass cylinder.

This version ensures a functional flow check from two points of view. On one hand, its construction as a visible cylinder gives a relatively large and thus easily observed field of observation. In addition, the rotary movement of the Teflon rotor permits reliable monitoring of cloudy or dark media due to its noticeably bright colour. This type of device is already widely used and has proved itself in industrial use thanks to its functional reliability.

The design and construction of the DAA flow indicator deserves special mention.

Due to integration of two wiper elements, Kobold has, for the first time, been successful in combining a flow indicator with a device which allows the equipment to be cleaned during operation. The sight tube can be rotated so that the wiper elements concentrate the dirt into two narrow strips on the interior of the glass. From there it is taken away effortlessly by the flow.

For this purpose, the Borosilicate glass tube is fitted with O-rings which slide easily, so that the cleaning of the unit can be carried out by hand even under full operating pressure. The flow indicator with integral cleaning device can be used in any position for checking the flow of gases and liquids. A choice of sizes is offered with connection dimensions G¼ to G1½, with which flow rates of 0,4 l/min up to 100 l/min can be reliably checked.

Along with the standard housing version in brass, the units are also offered in a resistant stainless-steel version for aggressive media. If the rotor is unwanted for particular applications, e.g. for increases in flow rate, the unit is also available with just a sight glass with cleaning device. The type DAA flow indicators are usable for operating pressures up to PN 16 at temperatures up to 100°C.

For more information contact Instrotech, +27 10 595 1831, [email protected], www.instrotech.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Radiometric density measurements
Mecosa Flow Measurement & Control
Radiometric density measurements are used wherever conventional measurement techniques fail. Successful applications can be found in a wide variety of industries, especially where harsh process environments and difficult measuring conditions prevail.

Read more...
Battery-powered magmeter
Flow Measurement & Control
The RWEM/D battery-powered electromagnetic flow meter from Royce Water Systems is ideal for water and wastewater systems located at remote sites.

Read more...
Precise process and maximum savings with VEGABAR
VEGA Controls SA Flow Measurement & Control
Accurate measurementsof differential pressure is crucial for safety, efficiency and optimising operational processes. For over 40 years, VEGA has supplied industry-leading pressure measurement solutions, establishing itself as a trusted expert with a proven track record in sensor technology.

Read more...
Innovative solutions for low flow dosing with high precision
Mecosa Flow Measurement & Control
n the food, pharma, and chemical manufacturing industries, precision and efficiency are of utmost importance. Bronkhorst High-Tech has developed a flexible solution that meets today’s requirements for highly accurate dosing, whether continuous, in ratio, or in batches.

Read more...
Battery-powered magmeter
Flow Measurement & Control
The RWEM/D battery-powered electromagnetic flow meter from Royce Water Systems is ideal for water and wastewater systems located at remote sites.

Read more...
Smart technology for municipal services
VEGA Controls SA Flow Measurement & Control
A new wave of smart technologies has emerged from VEGA Instruments, promising a revolutionary impact on the efficiency and dependability of municipal services.

Read more...
Sustainable journey with hydrogen
Mecosa Flow Measurement & Control
Bronkhorst High-Tech, the Dutch leader in flow measurement and control, has been focusing on hydrogen applications in the renewable energy market for some time, and for good reason.

Read more...
Custom solutions for pressure measurement
Instrotech Sensors & Transducers
Wherever pressure sensors are needed, a solution can normally be found in the Keller product catalogue. However, there are often great benefits to optimising a product specifically for integration and use in complete existing systems.

Read more...
Pressure sensors for hydrogen applications
Instrotech Pressure Measurement & Control
Keller manufactures isolated piezoresistive pressure sensors. The great advantage of the piezoresistive measuring principle is its high stability.

Read more...
Optimise sludge treatment and reduce operational costs
Endress+Hauser South Africa Flow Measurement & Control
The Endress+Hauser inline measuring devices, the Proline Teqwave MW 300 and the Proline Teqwave MW 500, determine the total solids content of wastewater directly through microwave transmission.

Read more...