The electromagnetic flowmeter ModMAG M1000 has been designed for applications in machinery plants, vehicles and batching processes in the range from DN 6 to DN 200 with a variety of process connections such as DIN flanges, dairy pipe connections, TriClamp, etc.
The basic line of M1000s is provided with a 24 VDC power supply without display, with passive outputs, and can be programmed via a serial RS-232 port or via a separate handheld device. The instruments can also, upon request, be factory preconfigured and then just need to be electrically connected on site.
M2000
The amplifier type ModMAG M2000 is best suited for bidirectional flow measurement of fluids with a conductivity greater than 5 μS/cm (> 20 μS/cm for demineralised water). Instruments in the M2000 series show high accuracy, are easy to use and can be chosen for a large and flexible applications spectrum.
The backlit, four-line display shows all actual flow measuring data, daily and complete information, including alarm messages. The standard amplifier has four programmable digital outputs, one digital input, power output and USB interface. Integrated test tools make the setup, operation and service easier.
M3000/M4000
These new electromagnetic flowmeters with modular design allow flow measurements in Ex zones 1 and 2, in either the mounted or remote version. The amplifier housing, made of powder-coated aluminium, is available in protection class IP67 and with a separate connection space.
Programming can be done either with closed housing, thanks to a magnetic pen, or with open housing via three buttons. The four-line display shows all necessary data like actual flow, totaliser and status messages. The programmable excitation frequency even enables the amplifier to be adjusted for difficult metering applications. The newly developed process for amplifier compensation enables a high accuracy, especially in the lower flow range.
M5000
The B-MAG M5000 is a battery-powered electromagnetic flowmeter with very high accuracy even at low flows. The excellent repeatability as well as the above average battery life makes this innovative water meter indispensable to the water industry. Typical applications are leak detection in water networks, water consumption measurements and irrigation plants.
The meter is best suited for applications without a power supply, where exact consumption or flow rates are required. The meter can be powered with mains voltage, and in case of a mains failure, the internal battery takes over. All instruments are designed to comply with OIML R49-1 and MID MI-001.
Precision measurement for ultra-pure water systems Anton Paar
Flow Measurement & Control
[Sponsored] Ultra-pure water (UPW) is essential in industries where even minor contaminants can impact product quality and process integrity. Anton Paar’s L-Cor Coriolis mass flowmeters provide a highly accurate and hygienic solution by directly measuring the mass of the liquid using the Coriolis effect, ensuring a high level of cleanliness.
Read more...Radiometric density measurements Mecosa
Flow Measurement & Control
Radiometric density measurements are used wherever conventional measurement techniques fail. Successful applications can be found in a wide variety of industries, especially where harsh process environments and difficult measuring conditions prevail.
Read more...Battery-powered magmeter
Flow Measurement & Control
The RWEM/D battery-powered electromagnetic flow meter from Royce Water Systems is ideal for water and wastewater systems located at remote sites.
Read more...Precise process and maximum savings with VEGABAR VEGA Controls SA
Flow Measurement & Control
Accurate measurementsof differential pressure is crucial for safety, efficiency and optimising operational processes. For over 40 years, VEGA has supplied industry-leading pressure measurement solutions, establishing itself as a trusted expert with a proven track record in sensor technology.
Read more...Innovative solutions for low flow dosing with high precision Mecosa
Flow Measurement & Control
n the food, pharma, and chemical manufacturing industries, precision and efficiency are of utmost importance. Bronkhorst High-Tech has developed a flexible solution that meets today’s requirements for highly accurate dosing, whether continuous, in ratio, or in batches.
Read more...Battery-powered magmeter
Flow Measurement & Control
The RWEM/D battery-powered electromagnetic flow meter from Royce Water Systems is ideal for water and wastewater systems located at remote sites.
Read more...Smart technology for municipal services VEGA Controls SA
Flow Measurement & Control
A new wave of smart technologies has emerged from VEGA Instruments, promising a revolutionary impact on the efficiency and dependability of municipal services.
Read more...Sustainable journey with hydrogen Mecosa
Flow Measurement & Control
Bronkhorst High-Tech, the Dutch leader in flow measurement and control, has been focusing on hydrogen applications in the renewable energy market for some time, and for good reason.
Read more...Optimise sludge treatment and reduce operational costs Endress+Hauser South Africa
Flow Measurement & Control
The Endress+Hauser inline measuring devices, the Proline Teqwave MW 300 and the Proline Teqwave MW 500, determine the total solids content of wastewater directly through microwave transmission.
printer friendly version