Mines must choose PDS to comply with safety law
March 2017
IS & Ex
While many mines consider proximity detection systems (PDS) a ‘grudge purchase’ to comply with the revised Mine Health and Safety Act (MHSA), there is still considerable legal onus on both users and suppliers to ensure that all equipment is fit for purpose.
Anton Lourens, managing director of leading PDS supplier Booyco Electronics, emphasises the importance of mines being very careful in their selection of equipment to avoid falling foul of the law.
“We’ve seen a strong drive by the Department of Mineral Resources to enforce compliance with the new legislation,” says Lourens. “Some mining companies will opt for the cheapest equipment just so they can tick that box in the requirements, but this does create a risk further down the line if an accident occurs and equipment is found to be not up to the task.”
He also highlights the responsibility of PDS suppliers to deliver a reliable solution to their mining customers, and pointed out that there are still suppliers in the market who do not fully understand their legal liabilities when selling PDS technology to mines.
“In terms of Section 21 of the MHSA, the equipment supplied by OEMs must be fit for purpose,” he adds. “If it is found that equipment does not comply, then the OEM can face both civil and criminal prosecution; as the PDS supplier to the OEM, we also bear responsibility.”
Lourens says the role of a competent supplier is to help educate customers about the importance of the drive towards zero harm, which requires a commitment and passion rather than a tick box approach.
“My view is that our biggest challenge when dealing with the mining sector is customer education, getting the end-users to understand what is a fit for purpose technology, and what the limitations are with each of the technologies,” he explains.
He adds that the vital research and development required to advance the capability of PDS offerings had to be funded by the suppliers, not the mines. This placed a financial burden on all companies active in this space, but that was unavoidable in the light of legislation and suppliers must take on this responsibility with care and commitment.
For more information contact Anton Lourens, Booyco Electronics, 086 126 6926, [email protected], www.booyco-electronics.co.za
Further reading:
Field service regime key for effective PDS/CPS operation
IS & Ex
While their primary objective is to ensure the safety of people, proximity detection system and collision prevention system installations also have a direct bearing on other critical parameters such as equipment availability and productivity.
Read more...
World’s first 5G smartphone for ATEX and IECEx zone 1/21
Extech Safety Systems
IS & Ex
i.safe MOBILE has launched the world’s first 5G smartphone for ATEX and IECEx zone 1/21. The intrinsically safe mobile device, which was also developed for use in 5G campus networks, offers companies great flexibility thanks to its wide range of possible applications, especially in the automation sector.
Read more...
Fully Ex-certified access point solutions for wireless communication
Pepperl+Fuchs
IS & Ex
Pepperl+Fuchs now offers a wireless access point solution that is fully certified in accordance with ATEX/IECEx standards, and forms the basis for end-to-end Wi-Fi communication in hazardous areas.
Read more...
Secure, digital communication in potentially explosive atmospheres
Pepperl+Fuchs
IS & Ex
Consistently digitalised processes in the smart factory are a matter of course today, but not in potentially explosive atmospheres. The systems and devices used in these areas must have optimal protection mechanisms to ensure maximum safety.
Read more...
Functional and compatible intrinsically safe loop approvals
Extech Safety Systems
IS & Ex
With all the focus on IS loop approval, it is easy to forget to check that the loop will function correctly to see whether the field device has sufficient power (voltage & current) to operate over the full process range.
Read more...
Upgrade your legacy alarm units
Omniflex Remote Monitoring Specialists
IS & Ex
Darren Barratt, sales manager at alarm annunciator specialist Omniflex, explains the drawbacks of leaving outdated rack-based alarm annunciator systems in place, and why an upgrade might be simpler than you would expect.
Read more...
Cathodic protection system for hazardous environments
Omniflex Remote Monitoring Specialists
IS & Ex
When NSW Ports in Australia embarked on a two-year programme to rehabilitate the structures and combat corrosion levels at its Bulk Liquid Berth 1, it commissioned Melbourne-based consultancy Infracorr to deliver a bespoke cathodic protection) system. To deliver the system safely, Infraccor engaged cathodic protection specialist Omniflex to support the hazardous area and remote monitoring aspects of the CP system design.
Read more...
Leading the way in PDS technology
IS & Ex
Booyco Electronics, an original equipment manufacturer specialising in mine safety equipment, has witnessed a surge in demand for its proximity detection systems (PDS) and collision prevention systems (CPS) since the Mine Health and Safety regulation focusing on trackless mobile machinery was promulgated. These systems offer crucial vehicle-to-pedestrian and vehicle-to-vehicle detection capabilities.
Read more...
Ensuring lone worker safety
IS & Ex
The Conextivity Group’s startup – Wearin’ – has developed a solution connecting the lone worker with the control centre. This was commissioned by concrete producer, Pro Beton to ensure the safety of its teams of machine operators and cleaners working on production sites during the day, night, and weekends.
Read more...
Safety breakthrough in live testing of large equipment
IS & Ex
While essential to effective maintenance, the live testing of mining vehicles and equipment can be hazardous and time consuming; but this has all changed with the SafeGauge range of digital testing systems. Developed in Australia, SafeGauge is now distributed in South Africa by Booyco Electronics, known for its leading role in promoting safety on mines through its proximity detection systems.
Read more...
printer friendly version