Level Measurement & Control


Radiation-based instrumentation for extreme conditions

December 2013 Level Measurement & Control

Vega is the first supplier of SIL-qualified measuring instruments for radiation-based level and point level measurement. The ProTrac series was developed according to the strict specifications of IEC/EN 61508 and all sensors in this series fulfil the highest requirements. In addition, all ProTrac sensors have an ingenious asset management system.

Radiation-based technology

Under extreme process conditions many measuring techniques quickly reach their limits. This is where ProTrac is different as the radiation-based gauges remain completely unaffected by high vessel pressures, aggressive media, extreme medium temperatures or difficult physical product properties. Using gamma radiation, ProTrac sensors can measure contactlessly right through container walls – accurately and without maintenance.

A detector for each application

Another special feature of ProTrac radiation-based gauges is that every instrument can be equipped with a detector best suited for its respective area of application. For example, the SoliTrac is specialised for cylindrical vessels, with a PVT rod detector that can reach up to three metres.

The flexible FiberTrac, which has a detector tube with a maximum length of seven metres, is ideal for round and conical vessels; and the MiniTrac, with a NaI crystal detector, has a small, compact design.

A range of applications

Vega’s ProTrac series of gauges are suitable for a range of applications. An example is level measurement in a polyester melt process, where the gamma radiation penetrates the cylinder despite the rotation of the cylinder and the great heat generated during the process. ProTrac is also suitable for level detection in cellulose production and for density measurement of lime water in flue gas desulphurisation. They can also be used on conveyor belts to measure mass flow of a hot product such as clinker.

For more information contact Chantal Groom, Vega Instruments SA, +27 (0)11 795 3249, [email protected], www.vega.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

A new era in radiometric level and density measurement
Mecosa Level Measurement & Control
The LoopSeries LB 430 radiometric detector from Berthold Technologies has a revolutionary power solution and sets new standards in level and density measurement.

Read more...
Pulp fiction or pulp precision?
VEGA Controls SA Sensors & Transducers
The density of fruit concentrate has a direct impact on the flavour, texture and overall quality of the final product. The VEGA Minitrac 31, VEGASOURCE 31, and the KV 31 mounting bracket present a failproof solution that effectively addresses the technical complexities associated with high temperature, viscosity and fouling.

Read more...
Differential pressure measurement in gas extraction and power generation project
VEGA Controls SA Pressure Measurement & Control
Methane exploration and extraction in Lake Kivu in the East African Rift Valley has primarily focused on gas composition analysis. The VEGABAR 82 pressure transmitter was used for differential pressure measurement, the key to monitoring gas levels within the lake.

Read more...
Level measurement of an acid dosing tank at a WWTP
Level Measurement & Control
Ferric chloride and other acids are essential chemical substances in water and wastewater treatment. To control the dosing of acid solutions, an Australian wastewater treatment plant uses a special container to store, mix and add these chemicals. The company opted in favour of KROHNE’s OPTIWAVE 1540 radar level transmitter

Read more...
Level measurement of leachate from sewage sludge humification
Level Measurement & Control
A municipal utility in eastern Germany operates a state-of-the-art wastewater treatment plant with sustainable sludge treatment. The ultrasonic signal was being partially deflected by the wind, leading to frequent false measurements and inefficient process workflows. The problem was solved by replaced the ultrasonic level sensor with KROHNE’s OPTIWAVE 1540 non-contact radar.

Read more...
Groundbreaking measurement system
Mecosa Level Measurement & Control
Berthold Technologies has launched the LoopSeries LB 430, an innovative, industry-leading measurement system designed to enhance operational efficiency with advanced level, density, and level switch capabilities.

Read more...
Level measurement of a water sump at a sewage treatment plant
Level Measurement & Control
A major city council in South East Queensland, Australia maintains and operates a wastewater treatment plant (WWTP) for municipal, industrial and agricultural wastewater. Due to the risk of flooding, the water sump must be continuously monitored. The solution is KROHNE’s OPTIWAVE 1540 radar level transmitter.

Read more...
Simplicity in measurement
Endress+Hauser South Africa Level Measurement & Control
Endress+Hauser’s new 80 GHz compact radar range is designed to help customers reach their compliance targets through simple yet efficient measurement solutions.

Read more...
Don’t buckle under pressure
VEGA Controls SA Pressure Measurement & Control
In Africa, urban populations are increasing and infrastructure is expanding at an unprecedented pace. This makes sustainable water management and treatment more crucial than ever. By investing in VEGA pressure instrumentation, water utilities and municipalities are equipping themselves with pressure sensors that facilitate sustainable water management focused on efficiency, reliability and resilience.

Read more...
Case History 196: Unstable condensate level control.
Michael Brown Control Engineering Editor's Choice Level Measurement & Control
The operators in a petrochemical refinery were having great trouble in trying to stabilise the condensate level in a vessel, and this was adversely affecting other loops downstream. Several unsuccessful attempts had been made to retune the controller.

Read more...