Level Measurement & Control


Level measurement of a water sump at a sewage treatment plant

March 2025 Level Measurement & Control

A major city council in Southeast Queensland, Australia maintains and operates a wastewater treatment plant (WWTP) for municipal, industrial and agricultural wastewater. At the inlet of the sewage treatment plant, the received wastewater loads cross the wet well of a sewage pumping station (SPS).

Measurement requirements

The SPS is exposed to heavily fluctuating water levels. Due to the risk of flooding, the water sump must be continuously monitored. Only if the operator has factual information about the dynamic changes in the water level can additional pump capacities be activated to counteract the discharge of wastewater into the sump environment.

Previously, the utility had been using a competitor’s hydrostatic level probe, which lacked the desired measurement dynamics and did not respond as fast as required. The submersible probe was also prone to clogging and maintenance. The council was therefore looking for an alternative solution that would provide reliable performance during extreme weather events where rapid level changes can occur.

KROHNE solution

A trial with the OPTIWAVE 1540 radar level transmitter has convinced the operator. The very cost-effective 80 GHz radar is designed for non-contact level measurement of wastewater and is very well suited for continuous level measurement in sewage pumping stations. Its high signal dynamics enable fast response to rapidly changing water levels.

With its narrow beam-angle it can be mounted fairly close to the wall of the pit. The radar was installed with a flush-mounted DN40 Lens antenna. The radar is suspended above an 8 metre high concrete pit using a hydrostatic cable clamp assembly and a 5 metre cable length. Unlike hydrostatic probes, the OPTIWAVE 1540 is not affected by sludge buildup on the sensor. As a non-contact level transmitter, the OPTIWAVE 1540 provides durability, with no wear and tear. Its PVDF antenna material is chemically resistant to a wide range of products and vapours. As the instrument comes with IP 68 ingress protection, the device will be undamaged even in the event of overflow occurring and regain measurement when the level drops.

The 80 GHz radar was easily configured via the OPTICHECK Level Mobile app which uses a preconfigured, application-specific template for quick level radar setup. Having entered the basic application parameters, the client quickly commissioned the KROHNE device via secure Bluetooth communication.

Customer benefits

The economical and extremely compact 80 GHz radar provides the utility company with reliable performance, offering ±2 mm accuracy at a price point comparable to hydrostatic level measurement. Due to its excellent response time, the customer can continuously monitor rising water levels and take immediate action to control the sewer, activate a secondary pump and prevent flooding of the sump in high-flow and high-level weather events. In addition, the operator was able to convert the level readings easily into the DCS. The radar was flexibly adapted to the scale of the previous pressure transmitter using the presetting provided by the mobile app.

The OPTICHECK Level Mobile app made commissioning of the radar level transmitter straightforward and convenient. The Bluetooth connection enabled device setup via mobile phone from a safe distance, eliminating the need for service engineers to lean over the pit or manually operate the device for configuration changes or generating reports. With OPTICHECK technology built-in device diagnostics, the OPTIWAVE 1540 can be easily verified through the app, providing quick access to diagnostics and reporting features, which can be swiftly sent for analysis in the event of unusual measurements or just for regular performance and device status monitoring.

Features and benefits of the OPTIWAVE 1540 include:

• Radar level transmitter for basic applications with liquid chemicals and open channel flow.

• Cost-effective non-contact level measurement in chemical tanks at low pressure of up to 5 bar and low temperature of up to 80°C.

• 80 GHz radar lens antenna.

• Measuring range of 0…15 m.

For more information contact KROHNE SA, +27 11 314 1391, [email protected], www.krohne.com




Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Level measurement of an acid dosing tank at a WWTP
Level Measurement & Control
Ferric chloride and other acids are essential chemical substances in water and wastewater treatment. To control the dosing of acid solutions, an Australian wastewater treatment plant uses a special container to store, mix and add these chemicals. The company opted in favour of KROHNE’s OPTIWAVE 1540 radar level transmitter

Read more...
Level measurement of leachate from sewage sludge humification
Level Measurement & Control
A municipal utility in eastern Germany operates a state-of-the-art wastewater treatment plant with sustainable sludge treatment. The ultrasonic signal was being partially deflected by the wind, leading to frequent false measurements and inefficient process workflows. The problem was solved by replaced the ultrasonic level sensor with KROHNE’s OPTIWAVE 1540 non-contact radar.

Read more...
Groundbreaking measurement system
Mecosa Level Measurement & Control
Berthold Technologies has launched the LoopSeries LB 430, an innovative, industry-leading measurement system designed to enhance operational efficiency with advanced level, density, and level switch capabilities.

Read more...
Simplicity in measurement
Endress+Hauser South Africa Level Measurement & Control
Endress+Hauser’s new 80 GHz compact radar range is designed to help customers reach their compliance targets through simple yet efficient measurement solutions.

Read more...
Case History 196: Unstable condensate level control.
Michael Brown Control Engineering Editor's Choice Level Measurement & Control
The operators in a petrochemical refinery were having great trouble in trying to stabilise the condensate level in a vessel, and this was adversely affecting other loops downstream. Several unsuccessful attempts had been made to retune the controller.

Read more...
Non-contact level measurement for hygienic and industrial applications
ifm - South Africa Level Measurement & Control
The LW2720 radar level sensor from ifm sets new benchmarks for speed and accuracy.

Read more...
Level measurement in oil storage
VEGA Controls SA Level Measurement & Control
Measuring the level of crude oil in storage is essential for safe and efficient operations. VEGA offers solutions that effectively address the challenges, ensuring precise and consistent level measurements in crude oil storage facilities. VEGA’s sensors offer reliable data on the volume, level and pressure of all types of media. Accurate level measurement is complicated by crude oil thermal expansion properties, particularly in lighter oil grades.

Read more...
Cloud-based inventory management
Endress+Hauser South Africa Level Measurement & Control
Netilion is an award-winning cloud-based IIoT ecosystem designed for industrial processes. It connects the physical and digital worlds to send valuable information from the field straight to your phone, tablet or other device.

Read more...
Smart solutions for tabletting
VEGA Controls SA Level Measurement & Control
The manufacturing of pharmaceuticals is considered to be one of the most challenging production environments. Pharmaceutical manufacturers across the globe have opted for VEGA sensors in their production facilities.

Read more...
Magnetostrictive level transmitter
WIKA Instruments Level Measurement & Control
WIKA’s new model FLM-Tx-FLEX magnetostrictive level transmitter is used for high-accuracy, continuous level detection of liquids, including those with long insertion lengths.

Read more...