Tag level switches are designed to detect the presence of different materials accrued in the surroundings of the electrode’s position. Materials can be any fluids, semi-fluids, powders and granules, conductive or non-conductive, grains, powders, plastic raw materials, oils and water. The electrode can be installed in free air or closed vessels. Vessels may be metallic or non-metallic pipes or reservoirs. Any material adhering to it does not affect the function of the sensing unit.
Some of the principals on which the Tag units function are changes of RF current and voltage, loss of energy and changes of dielectric constant versus air (disregarding capacity). RF is transferred from the feeler through the mass of the material to ground point of the sensing unit. This causes RF energy losses. The variations of RF current are transformed to DC and thus reach the control box. The amplifier in the control box activates the relay which incorporates dry contacts. The set will continue to work properly even if the feeler is totally covered by material.
After initial fitting of the unit, no further adjustment is required. The Tag level switches do not require maintenance and offer a truly fit-and-forget solution.
A fresh approach to dairy processing VEGA Controls SA
Level Measurement & Control
Ensuring the quality and safety of milk throughout the production process is of the utmost importance in the dairy industry. The VEGABAR pressure transmitters are suitable for hygienic applications. They are an asset in the dairy industry and have been used with success for measuring the milk level and the process pressure in storage tanks.
Read more...Telco sensors in the pulp and paper industry Gail Norton Instrumentation
Sensors & Transducers
The pulp and paper industry poses a major problem for most photoelectric sensors. The high level of contamination in these dusty, dirty and grimy environments makes it impossible for most competing sensors to operate and sense reliably and efficiently.
Read more...Level measurement of an acid dosing tank at a WWTP
Level Measurement & Control
Ferric chloride and other acids are essential chemical substances in water and wastewater treatment. To control the dosing of acid solutions, an Australian wastewater treatment plant uses a special container to store, mix and add these chemicals. The company opted in favour of KROHNE’s OPTIWAVE 1540 radar level transmitter
Read more...Level measurement of leachate from sewage sludge humification
Level Measurement & Control
A municipal utility in eastern Germany operates a state-of-the-art wastewater treatment plant with sustainable sludge treatment. The ultrasonic signal was being partially deflected by the wind, leading to frequent false measurements and inefficient process workflows. The problem was solved by replaced the ultrasonic level sensor with KROHNE’s OPTIWAVE 1540 non-contact radar.
Read more...Groundbreaking measurement system Mecosa
Level Measurement & Control
Berthold Technologies has launched the LoopSeries LB 430, an innovative, industry-leading measurement system designed to enhance operational efficiency with advanced level, density, and level switch capabilities.
Read more...Level measurement of a water sump at a sewage treatment plant
Level Measurement & Control
A major city council in South East Queensland, Australia maintains and operates a wastewater treatment plant (WWTP) for municipal, industrial and agricultural wastewater. Due to the risk of flooding, the water sump must be continuously monitored. The solution is KROHNE’s OPTIWAVE 1540 radar level transmitter.
Read more...Simplicity in measurement Endress+Hauser South Africa
Level Measurement & Control
Endress+Hauser’s new 80 GHz compact radar range is designed to help customers reach their compliance targets through simple yet efficient measurement solutions.
Read more...Leaders in sensor technology Gail Norton Instrumentation
Sensors & Transducers
Photoelectric eyes have always needed perfect working conditions, but in the workplace there is no such thing. Steam, water, light and dirt interfere with most photoelectric eyes, but never with a Telco sensor.
Read more...Case History 196: Unstable condensate level control. Michael Brown Control Engineering
Editor's Choice Level Measurement & Control
The operators in a petrochemical refinery were having great trouble in trying to stabilise the condensate level in a vessel, and this was adversely affecting other loops downstream. Several unsuccessful attempts had been made to retune the controller.
printer friendly version