Flow Measurement & Control


Mass measurement in plastic production

October 2009 Flow Measurement & Control Mass Measurement

BASF, the world’s largest chemical company, uses several Krohne mass flowmeters in the Luran factory at its headquarters in Ludwigs-hafen. Plastic production has many complex requirements, which Krohne is best able to fulfil with its Optimass 7000 straight-tube meter.

The Optimass features problem-free commissioning and the ability to run idle even when installed horizontally. When BASF undertook the conversion of an old system in the Luran factory, Krohne Coriolis meters were the first choice. The Optimass 7000 flowmeters are used when conveying solvents and are the third generation of Krohne Coriolis meters to be installed by BASF in its systems.

Optimass at BASF
Optimass at BASF

The OPTIMASS straight-tube design

Krohne has always relied on the straight-tube design in the Coriolis field, because the advantages over mass flowmeters with bent or twin-tubes are obvious. Curved or annular tubes and twin-tubes designs with flow dividers prove to be unreliable in many applications using Coriolis meters. Various media, such as viscous, non-Newtonian, fluids that are susceptible to shearing or which contain solids can cause high pressure loss for twin-tube devices. Abrasive media can attack flow dividers and the bends in pipes, while fibrous measured substances such as palm oil or cellulose can cling to flow dividers and cause blockages.

Among the most important advantages of straight-tube devices are low pressure loss, less abrasion, their suitability for large flow volumes, their greater measuring range and the prevention of blockage. Straight-tube devices are also easy to clean and are suitable for measuring highly viscous media, thanks to the favourable ratio of the short measuring tube and large inner diameter.

For more information contact Mahendra Rajcoomar, Krohne South Africa, +27 (0)11 314 1391, [email protected], www.krohne.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Radiometric density measurements
Mecosa Flow Measurement & Control
Radiometric density measurements are used wherever conventional measurement techniques fail. Successful applications can be found in a wide variety of industries, especially where harsh process environments and difficult measuring conditions prevail.

Read more...
Battery-powered magmeter
Flow Measurement & Control
The RWEM/D battery-powered electromagnetic flow meter from Royce Water Systems is ideal for water and wastewater systems located at remote sites.

Read more...
Precise process and maximum savings with VEGABAR
VEGA Controls SA Flow Measurement & Control
Accurate measurementsof differential pressure is crucial for safety, efficiency and optimising operational processes. For over 40 years, VEGA has supplied industry-leading pressure measurement solutions, establishing itself as a trusted expert with a proven track record in sensor technology.

Read more...
Innovative solutions for low flow dosing with high precision
Mecosa Flow Measurement & Control
n the food, pharma, and chemical manufacturing industries, precision and efficiency are of utmost importance. Bronkhorst High-Tech has developed a flexible solution that meets today’s requirements for highly accurate dosing, whether continuous, in ratio, or in batches.

Read more...
Battery-powered magmeter
Flow Measurement & Control
The RWEM/D battery-powered electromagnetic flow meter from Royce Water Systems is ideal for water and wastewater systems located at remote sites.

Read more...
Smart technology for municipal services
VEGA Controls SA Flow Measurement & Control
A new wave of smart technologies has emerged from VEGA Instruments, promising a revolutionary impact on the efficiency and dependability of municipal services.

Read more...
KROHNE reaches important milestone in Ethernet-APL
KROHNE Fieldbus & Industrial Networking
In December 2023, KROHNE made Ethernet-APL demo devices available to selected customers. This step marks an important milestone in the company’s own Ethernet APL development project for various sensor types. Ethernet-APL technology is a revolution in the process industry.

Read more...
Sustainable journey with hydrogen
Mecosa Flow Measurement & Control
Bronkhorst High-Tech, the Dutch leader in flow measurement and control, has been focusing on hydrogen applications in the renewable energy market for some time, and for good reason.

Read more...
Wireless communication system for remote access to data
KROHNE Data Acquisition & Telemetry
KROHNE has introduced the OPTIBRIDGE 3880 IIoT data logger for remote data services, acquisition and evaluation. It is a fully autonomous battery- or mains- powered wireless communication system for remote access to measurement data.

Read more...
Optimise sludge treatment and reduce operational costs
Endress+Hauser South Africa Flow Measurement & Control
The Endress+Hauser inline measuring devices, the Proline Teqwave MW 300 and the Proline Teqwave MW 500, determine the total solids content of wastewater directly through microwave transmission.

Read more...