Level Measurement & Control


Pressure sensor measures levels

February 2008 Level Measurement & Control

The VEGAWELL 51 represents a new generation of suspension pressure transmitters from Vega. The instruments are used for water and waste water applications, eg, for hydrostatic level measurement in vessels and gauge measurement in deep wells. Mounting is accomplished by means of a straining clamp or a threaded fitting with a protective cover for outdoor applications.

New suspension pressure transmitter with front-flush ceramic measuring cell and integrated temperature measurement
New suspension pressure transmitter with front-flush ceramic measuring cell and integrated temperature measurement

The sensor element is the small CERTEC measuring cell, which consists of a robust ceramic diaphragm and shielded measuring cell seal. The front-flush arrangement of the measuring cell prevents build-up and makes the instruments particularly suitable for dirtied media. The slim design (diameter 22 mm) enables applications in sounding pipes down to 25 mm.

The selectable measuring ranges lie between 0,1 and 10 bar, the application temperatures between -40 and 80°C. A signal output of 4-20 mA is supplied as with a HART signal optionally available. Input supply voltage can vary from 9,6-36 V d.c. Calibration is carried out on a PC with the adjustment PACTware or via a HART handheld device. VEGAWELL 51 is supplied with an overvoltage arrester as well as ATEX and ship approvals.

A practical supplement to these instruments is the new breather housing VEGABOX 02. It includes a high-quality ventilation filter, connection terminals as well as an optional temperature sensor with separate 4-20 mA signal output.

For more information contact John Groom, Vega Instruments SA, +27 (0)11 958 1901, [email protected], www.vega.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

A fresh approach to dairy processing
VEGA Controls SA Level Measurement & Control
Ensuring the quality and safety of milk throughout the production process is of the utmost importance in the dairy industry. The VEGABAR pressure transmitters are suitable for hygienic applications. They are an asset in the dairy industry and have been used with success for measuring the milk level and the process pressure in storage tanks.

Read more...
A new era in radiometric level and density measurement
Mecosa Level Measurement & Control
The LoopSeries LB 430 radiometric detector from Berthold Technologies has a revolutionary power solution and sets new standards in level and density measurement.

Read more...
Pulp fiction or pulp precision?
VEGA Controls SA Sensors & Transducers
The density of fruit concentrate has a direct impact on the flavour, texture and overall quality of the final product. The VEGA Minitrac 31, VEGASOURCE 31, and the KV 31 mounting bracket present a failproof solution that effectively addresses the technical complexities associated with high temperature, viscosity and fouling.

Read more...
Differential pressure measurement in gas extraction and power generation project
VEGA Controls SA Pressure Measurement & Control
Methane exploration and extraction in Lake Kivu in the East African Rift Valley has primarily focused on gas composition analysis. The VEGABAR 82 pressure transmitter was used for differential pressure measurement, the key to monitoring gas levels within the lake.

Read more...
Level measurement of an acid dosing tank at a WWTP
Level Measurement & Control
Ferric chloride and other acids are essential chemical substances in water and wastewater treatment. To control the dosing of acid solutions, an Australian wastewater treatment plant uses a special container to store, mix and add these chemicals. The company opted in favour of KROHNE’s OPTIWAVE 1540 radar level transmitter

Read more...
Level measurement of leachate from sewage sludge humification
Level Measurement & Control
A municipal utility in eastern Germany operates a state-of-the-art wastewater treatment plant with sustainable sludge treatment. The ultrasonic signal was being partially deflected by the wind, leading to frequent false measurements and inefficient process workflows. The problem was solved by replaced the ultrasonic level sensor with KROHNE’s OPTIWAVE 1540 non-contact radar.

Read more...
Groundbreaking measurement system
Mecosa Level Measurement & Control
Berthold Technologies has launched the LoopSeries LB 430, an innovative, industry-leading measurement system designed to enhance operational efficiency with advanced level, density, and level switch capabilities.

Read more...
Level measurement of a water sump at a sewage treatment plant
Level Measurement & Control
A major city council in South East Queensland, Australia maintains and operates a wastewater treatment plant (WWTP) for municipal, industrial and agricultural wastewater. Due to the risk of flooding, the water sump must be continuously monitored. The solution is KROHNE’s OPTIWAVE 1540 radar level transmitter.

Read more...
Simplicity in measurement
Endress+Hauser South Africa Level Measurement & Control
Endress+Hauser’s new 80 GHz compact radar range is designed to help customers reach their compliance targets through simple yet efficient measurement solutions.

Read more...
Don’t buckle under pressure
VEGA Controls SA Pressure Measurement & Control
In Africa, urban populations are increasing and infrastructure is expanding at an unprecedented pace. This makes sustainable water management and treatment more crucial than ever. By investing in VEGA pressure instrumentation, water utilities and municipalities are equipping themselves with pressure sensors that facilitate sustainable water management focused on efficiency, reliability and resilience.

Read more...