Reliable level detection in the plastics industry
March 2005
Level Measurement & Control
A new range of M30 capacitive level sensors has been introduced by IFM Electronic specifically designed for the plastic processing industry. The sensors meet IP67 requirements and reliably detect a wide range of plastics irrespective of material, residual moisture and temperature. Due to intelligent microprocessor technology, even pre-dried granules can be reliably detected.
The KN5120 sensors provide high EMC immunity through noise-immune electronics, and due to their mechanical structure, they offer immunity to electrostatic discharges that occur when plastics are conveyed.
Automatic sensitivity adjustment to suit the medium is done by simply pressing a pushbutton. The sensors' front face is rated for temperatures up to 110°C and they can be mounted in direct contact with the sight glass. A choice of a.c. or d.c. units is available and the universal switching output can be programmed to be either NC or NO. Two LEDs clearly indicate the level from a distance.
For more information contact Chris Huxham, Shorrock Automation, 012 345 4449, [email protected], www.shorrock.co.za
Further reading:
A fresh approach to dairy processing
VEGA Controls SA
Level Measurement & Control
Ensuring the quality and safety of milk throughout the production process is of the utmost importance in the dairy industry. The VEGABAR pressure transmitters are suitable for hygienic applications. They are an asset in the dairy industry and have been used with success for measuring the milk level and the process pressure in storage tanks.
Read more...
A new era in radiometric level and density measurement
Mecosa
Level Measurement & Control
The LoopSeries LB 430 radiometric detector from Berthold Technologies has a revolutionary power solution and sets new standards in level and density measurement.
Read more...
Level measurement of an acid dosing tank at a WWTP
Level Measurement & Control
Ferric chloride and other acids are essential chemical substances in water and wastewater treatment. To control the dosing of acid solutions, an Australian wastewater treatment plant uses a special container to store, mix and add these chemicals. The company opted in favour of KROHNE’s OPTIWAVE 1540 radar level transmitter
Read more...
Level measurement of leachate from sewage sludge humification
Level Measurement & Control
A municipal utility in eastern Germany operates a state-of-the-art wastewater treatment plant with sustainable sludge treatment. The ultrasonic signal was being partially deflected by the wind, leading to frequent false measurements and inefficient process workflows. The problem was solved by replaced the ultrasonic level sensor with KROHNE’s OPTIWAVE 1540 non-contact radar.
Read more...
Groundbreaking measurement system
Mecosa
Level Measurement & Control
Berthold Technologies has launched the LoopSeries LB 430, an innovative, industry-leading measurement system designed to enhance operational efficiency with advanced level, density, and level switch capabilities.
Read more...
Level measurement of a water sump at a sewage treatment plant
Level Measurement & Control
A major city council in South East Queensland, Australia maintains and operates a wastewater treatment plant (WWTP) for municipal, industrial and agricultural wastewater. Due to the risk of flooding, the water sump must be continuously monitored. The solution is KROHNE’s OPTIWAVE 1540 radar level transmitter.
Read more...
Simplicity in measurement
Endress+Hauser South Africa
Level Measurement & Control
Endress+Hauser’s new 80 GHz compact radar range is designed to help customers reach their compliance targets through simple yet efficient measurement solutions.
Read more...
Case History 196: Unstable condensate level control.
Michael Brown Control Engineering
Editor's Choice Level Measurement & Control
The operators in a petrochemical refinery were having great trouble in trying to stabilise the condensate level in a vessel, and this was adversely affecting other loops downstream. Several unsuccessful attempts had been made to retune the controller.
Read more...
Non-contact level measurement for hygienic and industrial applications
ifm - South Africa
Level Measurement & Control
The LW2720 radar level sensor from ifm sets new benchmarks for speed and accuracy.
Read more...
Level measurement in oil storage
VEGA Controls SA
Level Measurement & Control
Measuring the level of crude oil in storage is essential for safe and efficient operations. VEGA offers solutions that effectively address the challenges, ensuring precise and consistent level measurements in crude oil storage facilities. VEGA’s sensors offer reliable data on the volume, level and pressure of all types of media. Accurate level measurement is complicated by crude oil thermal expansion properties, particularly in lighter oil grades.
Read more...
printer friendly version