FCI's 12-64B flow monitor is a general purpose device for use over a wide flow range. Any type of external control system can be actuated from either the normally open or normally closed output contacts of the onboard DPDT relay.
The flow monitor has a setpoint range in water based liquids from 0,005 to 0,15 mps, with hydrocarbon-based liquids its range is from 0,003 to 0,61 mps and with air or gas the range is from 0,3 to 38 mps.
Its sensing element and modular control circuit are mounted in a rugged aluminium enclosure approved for hazardous location service. The wetted surfaces of the sensing element are 316 stainless steel with nickel-braze providing resistance to most liquid, gaseous and particulate media.
The 12-64B has an adjustable response time of 10 to 300 s and a 1% repeatability of the full signal range at constant process conditions. The flow element is suitable for use in an operating temperature range from -73 to +177°C and with an operating pressure up to 20,7 MPa.
Radiometric density measurements Mecosa
Flow Measurement & Control
Radiometric density measurements are used wherever conventional measurement techniques fail. Successful applications can be found in a wide variety of industries, especially where harsh process environments and difficult measuring conditions prevail.
Read more...Battery-powered magmeter
Flow Measurement & Control
The RWEM/D battery-powered electromagnetic flow meter from Royce Water Systems is ideal for water and wastewater systems located at remote sites.
Read more...Precise process and maximum savings with VEGABAR VEGA Controls SA
Flow Measurement & Control
Accurate measurementsof differential pressure is crucial for safety, efficiency and optimising operational processes. For over 40 years, VEGA has supplied industry-leading pressure measurement solutions, establishing itself as a trusted expert with a proven track record in sensor technology.
Read more...Innovative solutions for low flow dosing with high precision Mecosa
Flow Measurement & Control
n the food, pharma, and chemical manufacturing industries, precision and efficiency are of utmost importance. Bronkhorst High-Tech has developed a flexible solution that meets today’s requirements for highly accurate dosing, whether continuous, in ratio, or in batches.
Read more...Battery-powered magmeter
Flow Measurement & Control
The RWEM/D battery-powered electromagnetic flow meter from Royce Water Systems is ideal for water and wastewater systems located at remote sites.
Read more...Smart technology for municipal services VEGA Controls SA
Flow Measurement & Control
A new wave of smart technologies has emerged from VEGA Instruments, promising a revolutionary impact on the efficiency and dependability of municipal services.
Read more...Sustainable journey with hydrogen Mecosa
Flow Measurement & Control
Bronkhorst High-Tech, the Dutch leader in flow measurement and control, has been focusing on hydrogen applications in the renewable energy market for some time, and for good reason.
Read more...Optimise sludge treatment and reduce operational costs Endress+Hauser South Africa
Flow Measurement & Control
The Endress+Hauser inline measuring devices, the Proline Teqwave MW 300 and the Proline Teqwave MW 500, determine the total solids content of wastewater directly through microwave transmission.
Read more...Plant signal conditioning Omniflex Remote Monitoring Specialists
Flow Measurement & Control
Often, plant managers have a deep understanding of all the key operational challenges facing their facility, and have a broad knowledge of the instrumentation that can help solve them. However, they might not always be aware of the latest innovations that can make their lives even easier.
printer friendly version