Procon Electronics has recently launched a new multipurpose I/O module. This module incorporates both analog and digital I/O into a single product, and is ideal for applications that require remote I/O such as building management. The module is available with RS485 Modbus communications or with Ethernet Modbus TCP communications.
The new module consists of the following I/O:
* 2 X RTD inputs for temperature measurement. RTDs supported are PT100, Ni120 or PT1000 and cover the range from -200 to +850°C. Two or three wire RTDs can be used.
* 2 X analog inputs which can be configured as 0(4) to 20 mA current inputs or 0(2) to 10 V voltage inputs.
* 1 X analog output which can be configured as a 0(4) to 20 mA current output or a 0(2) to 10 V voltage output.
* 5 X digital inputs. Internal counters are connected to inputs 1 and 2. These counters can count from 0 to 4294967295, and can also be configured as an up/down counters.
* 2 X digital outputs. These are NPN transistor outputs and can be used to switch an external relay if required. A watchdog timer can be enabled to ensure the outputs are switched off if there is no communications.
The MMDIOAIO (RS485 modbus) module communicates on RS485 using the industrial standard modbus RTU protocol. Each module has a unique node address that is configured with DIP switches.
The MMTCPDIOAIO (modbus TCP) module communicates on Ethernet using the modbus TCP protocol. Each module is given a unique IP address for identification. These modules can be used on existing Ethernet networks and the information can be made available on the Internet. The modules also have a built in Web server. The Web server enables all process variables to be viewed from a PC running a Web browser, such as Internet Explorer, from anywhere on the network. This feature is excellent for diagnostic purposes and can be performed simultaneously with the modbus communications without interfering with the module operation. Up to 4 PLCs or PCs can access the same I/O module simultaneously.
The Modbus RTU and Modbus TCP protocols are widely supported by most PC scada software packages and by many PLCs.
A demonstration TCP module has been placed on the Internet and can be accessed from any PC on the Internet. Visit: http://192.96.43.120/</a>
Taking control of your warehouse stock is no walk in the park TransLution Software
Data Acquisition & Telemetry
Most companies focus on their production operations as a pain point. This is a mistake, as scheduling, moving, tracking and reporting on inventory at the operational level can have a major impact on production efficiency and profitability.
Read more...The industrial era of wireless telemetry and radio communication Schneider Electric South Africa
Data Acquisition & Telemetry
Today’s advanced wireless telemetry offers a range of benefits that go beyond cost savings, including greater flexibility and mobility, remote monitoring capabilities, and enhanced safety.
Read more...Connecting every transport node RJ Connect
Editor's Choice Data Acquisition & Telemetry
Stockholm's bus system strategically links urban mainline, suburban mainline, non-mainline routes, community service buses and night buses. To acquire and process data from multiple sources and analyse onboard information on their moving buses, Transdev sought a dependable and powerful onboard computer. It teamed up with CatAB, Moxa’s local representative, known for delivering top-notch industrial data communication boards and equipment since 1988.
Read more...Paratus South Africa boosts Tantum IT’s connectivity with Eutelsat
Data Acquisition & Telemetry
Tantum IT is a leading IT service provider specialising in remote IT management, cloud services, and secure data handling for industries in remote and high-demand environments. To overcome its connectivity challenges, Tantum IT chose Paratus, an official distributer of Eutelsat OneWeb’s Low Earth Orbit services, to provide the solution.
Read more...Wireless communication system for remote access to data KROHNE
Data Acquisition & Telemetry
KROHNE has introduced the OPTIBRIDGE 3880 IIoT data logger for remote data services, acquisition and evaluation. It is a fully autonomous battery- or mains- powered wireless communication system for remote access to measurement data.
Read more...New industrial tablet series for non-ex applications Pepperl+Fuchs
Data Acquisition & Telemetry
Pepperl+Fuchs is introducing a rugged tablet series in accordance with MIL-STD-810H. The slim Windows-based devices are available with a 20 or 25 cm display, offering numerous customisation options and an extensive range of accessories.
Read more...New wireless communication system for remote access to measurement data KROHNE
Data Acquisition & Telemetry
KROHNE has introduced the OPTIBRIDGE 3880 IIoT data logger for remote data services, acquisition and evaluation. This is a fully autonomous, battery- or mains-powered wireless communication system for remote access to measurement data, aimed at the water and wastewater industry.
Read more...Programmable LED indicators Turck Banner Southern Africa
Industrial Wireless Data Acquisition & Telemetry
Turck Banner is expanding its portfolio of LED lights with the robust LED indicators of the K100 series. These units improve workflow and reduce downtime through clearly communicated status information.
Read more...Decoding the world of direct part marks Omron Electronics
Data Acquisition & Telemetry
OMRON has unveiled its latest breakthrough, the V450-H ultra-rugged handheld scanner. Tailored specifically for industrial DPM reading, this innovative device sets new industry standards for durability and performance.
Read more...Green manufacturing energy conservation and emission reduction Dahua Technology South Africa
Data Acquisition & Telemetry
As a world-leading video-centric AIoT solution and service provider, Dahua is committed to improve its sustainable development capabilities and to make continuous efforts in building a greener and safer digital world by developing innovative solutions that can help conserve energy and reduce carbon emission.