Increased quantity and quality of blends with Moore solutions
September 2018System Integration & Control Systems Design
Ageing and obsolete control systems at a US-based producer of general and speciality grade polymers, was negatively affecting both throughput and the quality of blends. When Moore Process Controls approached the client, the die was cast for the move to an upgraded system.
Uwe Kurfurst, general manager, Moore Process Controls, explains that the batch reactor on the plant was running on a PLC installed in 1986, together with an obsolete HMI computer. This combination was limiting the complexity of the batch blends required and retarding the time taken to produce batches.
After an initial meeting in November 2015 to discuss the advantages of upgrading the control system, it took a further seven months to get all parties on board with the proposed solution. The decision was taken to replace Reactor 4, with the option to conduct upgrades on the remaining reactors at a later date.
Bret Stevenson, who was responsible for spearheading the project, says that the client requested an increased quality level of each batch. One of the issues with the existing system was that in some instances, and under certain conditions, a fairly high number of batches were considered ‘off-spec’. This meant that small portions of these off-spec batches needed to be blended back into subsequent batches to ensure acceptability according to quality requirements. The aim was to reduce the amount of re-blending needed and this could only be achieved if more batches were of a high enough quality from the outset. Other client requirements were that the system needed to allow for increased production to over four batches a day, and there needed to be a decreased reaction time.
The Moore team, (left to right) Bret Stevenson (business development manager), Jaco Pretorius (senior systems application engineer), Andrew Warunek (application engineer) and Uwe Kurfurst (project manager).
The Moore solution
Moore’s solution comprised a Rockwell PlantPAx PLC, FactoryTalk View Studio SE HMI, FactoryTalk Batch, FactoryTalk Historian SE, FactoryTalk VantagePoint EMI and a ControlLogix L-Series controller. “The project was designed using the ISA-88 standard for batch systems and a detailed and well-organised simulation code was developed to test the control and batching logic in strict accordance with the client’s specifications and I/O list,” says Stevenson.
He points out that all PLC and batching code was validated on a digital twin before being implemented onsite and Moore’s engineers supplied, configured and implemented the PlantPAx PLC onsite. Concurrently, a batch reporting system was supplied to provide detailed batch reports for the tracking of raw data.
A kick-off meeting was held onsite before any work commenced and regular site meetings took place once simulation began. In addition, progress meetings were conducted remotely twice a week to ensure that all project parameters were adhered to. “We provided regular progress reports and used internal systems to measure and report back to the client, thereby avoiding any issues that could possibly have arisen,” adds Stevenson.
A challenge faced by the Moore team was that because this was an old plant, many of the connection and electrical drawings were missing. “Ideally if one is conducting a rip and replace or upgrade project, it is desirable for all documentation to be made available,” explains Kurfurst. “For the next reactor we would conduct an extensive site survey and would assemble all information prior to the project kick-off. We would also work closely with the client’s production team to better ascertain the intricacies of the specific production line’s operation.”
Kurfurst concludes that the increased number of batches, as well as the enhanced quality with minimal re-blending now required, is testament to both the superiority of the system design as well as the admirable team effort.
The time is now for systems integrators
Editor's Choice System Integration & Control Systems Design
Integrators combine sophistication regarding technology innovation with practical, hands-on experience. Collaborating with systems integrators is the means to significant productivity improvement, powered by the convergence of automation and information and operations technology.
Read more...System integrators are a diverse market
Editor's Choice System Integration & Control Systems Design
System integrators (SIs) combine expertise on emergent technologies with real world experience. Working with SIs, it’s inevitable that at some point someone will say, “We’re not a typical SI.” And in many ways, it’s true. SIs come in all shapes and sizes.
Read more...Avoiding the pitfalls of PLC and scada control system integration Iritron
System Integration & Control Systems Design
Upgrading your control system by integrating PLCs with scada systems should be a simple seamless process. Regrettably, the industry is plagued with control system integration and upgrade myths and misconceptions that can lead to liability issues, project delays, cost overruns and decreased plant performance.
Read more...EtherCAT measurement terminals for vehicle development at Mercedes-Benz Beckhoff Automation
System Integration & Control Systems Design
At the Mercedes Technology Centre plant in Sindelfingen, Germany, car axles are examined with the highest precision on four test benches, in parallel with road tests and simulations. All data is acquired using PC-based control from Beckhoff.
Read more...Loop signature 23: Tuning Part 2.
Editor's Choice System Integration & Control Systems Design
It is my opinion that most tuning methods are very crude. They do of course also offer a starting point for tuning if one is not fortunate enough to have a sophisticated tuning package like a Protuner around.
Read more...PIC microcontrollers with integrated FPGA features in TME
System Integration & Control Systems Design
The new PIC16F131xx microcontrollers in TME’s offering from Microchip are ideal for the evolving and miniaturising electronic equipment market, offering efficient power management and predictable response times for controllers.
Read more...Five smart machine trends you need to know Adroit Technologies
System Integration & Control Systems Design
The last ten years have brought about dramatic advances in technologies that OEMs had never realised would affect their designs or the saleability of their machines, much less impact business models and profits so dramatically. The following discussion will cover key advancements and recommendations all OEMs should be adopting in their design processes to stay current and competitive.
Read more...36 years of innovation and success SAM Systems Automation & Management
Editor's Choice System Integration & Control Systems Design
Systems Automation & Management was established in 1988 at a time when there were no other systems integrators (SIs) in the process business. SA Instrumentation & Control’s editor caught up with managing director, Claudio Agostinetto to find out more about how this thriving company has prospered over the last 36 years.
Read more...Moore Process Controls is moving ahead Moore Process Controls
News
Moore Process Controls was established in South Africa in 1985, migrating from a local agent for Moore Products in the USA to a multi-faceted company with a wide range of automation and optimisation capabilities.
Read more...Understanding the role of AI in generative engineering design
System Integration & Control Systems Design
When a design engineer sets out to design a new part, component, or assembly, the intent is to meet the design requirements for fit, form and function, and also incorporate a certain degree of innovation and elegance to the overall design. There is no reason to re-invent the wheel by introducing a new design.
printer friendly version