Editor's Choice


How Danone SA pulled off its new automated palletising system

June 2023 Editor's Choice Motion Control & Drives

When Yaskawa Southern Africa was contacted about Danone’s new automation project in Boksburg, the industrial robotics manufacturer teamed up with one of its preferred suppliers, Tectra Automation to offer a turnkey solution. Yaskawa brought its automation expertise to the project, rising to Danone’s challenge of creating additional lifting capacity and speed, thanks in no small part to its PL 190 palletising robots.

“Danone needed a fully automated palletising system. Until that point, all of the palletising was done by hand, which is labour-intensive and has an increased risk of injury,” explains Hannes Crouse, sales manager at Yaskawa Southern Africa. The installation of an automated palletising system allows manufacturers to simplify the palletising process while also increasing reliability, accuracy, and repeatability. Automated palletising systems rely on the robot’s accuracy and flexibility to decrease injury risk and downtime, while also solving ergonomic problems.

The challenge

Due to the size and complexity of the palletising system, the system had to be installed and commissioned in phases. “Large, complicated projects will always have challenges,” says Jaco de Beer, system engineering manager at Tectra Automation. “We worked through various technical challenges from cycle time issues to finding solutions for very limited space constraints in both width and height. Working closely with Yaskawa, we were able to solve those problems. Additionally, having various SKUs makes the automation process more complex. For example, some products may need to be rotated on the infeed side before they reach the robot. Lastly, we needed to make sure that the entire system met stringent European safety standards.”

At the start, Yaskawa and Tectra Automation had to plan around multiple pallet patterns, a challenging endeavour for any large-scale automation project. The way that goods are packed is not always robot-friendly, as robots are programmed to pick up as much as possible in one cycle to make the process cost effective.


The solution

To tackle the project in the most pragmatic way, the teams at Yaskawa and Tectra opted for a three-phase approach. There would also be three different cells that made up the system: a palletising cell with a Yaskawa PL 190 robot, and on the inside, a destacker and a stretch wrapper. As more space became available on the floor, the team would install a new cell in the area and conduct commissioning before running the product through it and beginning the testing phases.

Yaskawa’s deliverables included a robot base and a robot with a gripper attached. Two robotic technicians that specialised in programming applications worked closely with Tectra Automation and multiple others that helped with the mechanical installation.

Another key element of the system comes in the form of the two de-stackers. “A de-stacker holds a stack of empty pallets and feeds the system one pallet at a time to a ready location for the robot that requests it via a signal,” explains Crouse. “For that, we also used automatic carts, which are controlled, along with the entire system, with industrial Wi-Fi communication.

“When the system pulls a pallet, you will have one empty pallet on standby at the robot station and another that it is being palletising,” explains de Beer. When the current pallet that is being palletised is full, it will automatically eject onto another cart system that takes it to a wrapper. It is then automatically wrapped and ejected once more, where it is loaded onto the cart again and moved through to logistics.”

The result

Danone’s palletising system consists of seven robots with two de-stackers in the middle. There are also special slip sheets between a set number of boxes to give stability to the pallets. Automatic carts collect and move them from one stage to another via a rail system. The system was designed to handle a maximum throughput while the robotic palletising cells achieve an efficiency of 98%. “It is now fully automated,” says Crouse. “From where we start, it gets palletised, stacked, wrapped, and sent to logistics for transport. It is a stable production.”

Operators can now be trained at a higher level to manage parameters and keep an overview of the system while the heavy lifting moves off to the robots. Manufacturers that adopt automation understand that the future is about maintaining efficiency, quality, and reliability. This, in turn, leads to higher profit margins.


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

The future of industrial automation: fieldbus and industrial networking
LAPP Southern Africa Editor's Choice
As a global leader in integrated solutions in the field of cable and connection technology, LAPP recognises that fieldbus and industrial networking technologies are pivotal in shaping the future of manufacturing and production processes.

Read more...
AI-driven innovations with CCTV and cyber security
RJ Connect Editor's Choice Fieldbus & Industrial Networking
The fast progress of artificial intelligence (AI) and video analytics is redefining the rail surveillance landscape. Advancements have bolstered proactive event detection, predictive maintenance and enhanced situational awareness.

Read more...
Loop signature 27: SWAG tuning of simple integrating processes.
Editor's Choice
The chief control engineer of one of the largest petrochemical refineries in South Africa once sent me an email after a course at his plant. He wrote that he had found the section on SWAG tuning of simple integrating processes one of the most informative of the whole course.

Read more...
Harnessing industrial AI agents for reliable automation
Editor's Choice IT in Manufacturing
The excitement around generative AI (GenAI) has been undeniable, promising wide-ranging changes across industries. However, for those of us in the world of industrial control and automation, the realities of implementing these powerful technologies are a little more nuanced.

Read more...
Futureproof your industrial network security with OT-centric cyber security
RJ Connect Editor's Choice
To achieve digital transformation, industrial operators must first address the daunting task of merging their information technology (IT) and operational technology (OT) infrastructure. In this article, we focus on the importance of strong OT network security and provide some tips on how to strengthen cybersecurity for industrial operations.

Read more...
Driving innovation in robotics and automation
Yaskawa Southern Africa Motion Control & Drives
Maintaining a competitive edge in a rapidly changing industrial landscape means embracing new technologies and adapting to evolving market demands. Yaskawa Southern Africa has positioned itself as a leader in robotics and automation, particularly in areas such as palletising, materials handling and advanced manufacturing

Read more...
The symbiotic relationship between OEMs and SIs
Schneider Electric South Africa Editor's Choice System Integration & Control Systems Design
While businesses tend to turn directly to original equipment manufacturers OEMs or vendors when embarking on IT projects, the role of the SI as a key facilitator and partner cannot be overstated.

Read more...
Case History 196: Unstable condensate level control.
Michael Brown Control Engineering Editor's Choice Level Measurement & Control
The operators in a petrochemical refinery were having great trouble in trying to stabilise the condensate level in a vessel, and this was adversely affecting other loops downstream. Several unsuccessful attempts had been made to retune the controller.

Read more...
Big themes for 2025
Editor's Choice News
2024 was a year of unprecedented innovation and global upheaval. As we look ahead, Amy Webb, CEO of the Future Today Institute asks which technologies will reshape our world in 2025?

Read more...
Revolutionising TIG welding for aerospace manufacturing
Yaskawa Southern Africa Motion Control & Drives
Yaskawa Southern Africa has partnered with Aerosud Aviation, a leading aerospace manufacturer, to implement a cutting-edge robotic TIG welding solution tailored to the exacting demands of aerospace production.

Read more...