Data Acquisition & Telemetry


Bringing solar power to reservoir monitoring

April 2022 Data Acquisition & Telemetry


Whether it’s a single water tank or a large water dam, powering a monitoring system on a remote site several kilometres away with limited access to grid infrastructure is challenging. Often these sites go unattended for long periods of time and are vulnerable to overfilling. Because these systems are critical to ensuring continuity of supply and preventing overfill and waste, water utility mangers often must fund costly infrastructure projects to support installation. 

Because manual inspections cannot be feasibly carried out regularly on a remote reservoir, utility managers will feel caught between a rock and a hard place when it comes to balancing cost, security and efficiency. So, what is a suitable solution?

Simply solar

It is a misconception that all solar-powered devices require an infrastructure. Yes, it was once the case that solar panels, battery chargers, backup power supplies and telemetry devices were fitted separately in costly and complex installation projects. However, with a growing reliance on automation and the need for monitoring devices to protect assets, new solar-powered telemetry systems have been developed that are cost-effective and easy to install.

Device manufacturers are now making programmable RTUs with integrated solar charge regulators in small footprints. These RTUs have terminals that directly plug in to the batteries, so all the system requires is for the device to be connected to a solar panel and a backup battery. Water utility managers can save considerable costs in upgrading the existing infrastructure by using devices such as Omniflex’s Teleterm S3 Series, weighing just 350 g. Being solar-powered, the device does not dissipate as much heat as mains-powered electronics. This, coupled with its compactness, allows it to sit comfortably in a secure, weatherproof IP 67-rated enclosure with its backup battery.

Considering the concerns

It is understandable that reservoir managers will have concerns over the efficacy and reliability of solar-powered devices. Power budgeting for batteries is a particular design constraint and battery selection is often made considering worst-case scenarios. For example, on days where there is less sunlight, panels cannot produce charge at maximum capacity and the batteries must take up the slack for repeated charge and discharge cycles. However, modern batteries have advanced quickly and now have greater tolerance for deep discharge cycling. This allows more technology to be deployed in these power-constrained applications. 

Battery life concerns have been considered by device manufacturers. For example, the S3’s power consumption is low, at just 35 mA at 12 V DC. To save power, the devices are programmed to store data locally and only transmit intermittently on a cyclic basis. On a reservoir you might want to know the usage profile over a 24 hour period. The S3 series can be programmed to take a reading every hour, but report back once every 24 hours, saving power. All data is backed up and secured on an SD memory card and power is used sparingly, making the Teleterm S3 the ideal deployment for reservoir monitoring. 

To avoid uncertainty when power is low, an internal backup battery is provided for the processor to power the real-time clock and keep synchronisation. If the external main batteries were to fail, the backups allow the device to shut down gracefully without corrupting any stored data. When communication comes back on, this data can then be securely transmitted back to the control room either via a cloud-based Data2Desktop network or licence-free band radio.

Omniflex has supplied solar-powered devices into extremely vulnerable locations successfully and solutions are available for remote sites. Solar-powered devices will continue to push the boundaries of what remote monitoring systems can offer. For remote locations where power is limited, safety is critical and cost-effectiveness is desired, water utility managers can be rest assured that their system remains reliable and secure in any eventuality.


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

The industrial era of wireless telemetry and radio communication
Schneider Electric South Africa Data Acquisition & Telemetry
Today’s advanced wireless telemetry offers a range of benefits that go beyond cost savings, including greater flexibility and mobility, remote monitoring capabilities, and enhanced safety.

Read more...
Keeping mine outstations connected
Omniflex Remote Monitoring Specialists Industrial Wireless
Remote monitoring specialist, Omniflex has helped wireless data communications systems firm, Scan RF implement site-wide monitoring systems at the 17 000-hectare Kolomela iron ore mine in South Africa.

Read more...
Connecting every transport node
RJ Connect Editor's Choice Data Acquisition & Telemetry
Stockholm's bus system strategically links urban mainline, suburban mainline, non-mainline routes, community service buses and night buses. To acquire and process data from multiple sources and analyse onboard information on their moving buses, Transdev sought a dependable and powerful onboard computer. It teamed up with CatAB, Moxa’s local representative, known for delivering top-notch industrial data communication boards and equipment since 1988.

Read more...
Paratus South Africa boosts Tantum IT’s connectivity with Eutelsat
Data Acquisition & Telemetry
Tantum IT is a leading IT service provider specialising in remote IT management, cloud services, and secure data handling for industries in remote and high-demand environments. To overcome its connectivity challenges, Tantum IT chose Paratus, an official distributer of Eutelsat OneWeb’s Low Earth Orbit services, to provide the solution.

Read more...
Simplifying battery management for remote dual-voltage systems
Omniflex Remote Monitoring Specialists Electrical Power & Protection
Ian Loudon, international marketing and sales manager at remote monitoring specialist, Omniflex outlines the advantages of dual-voltage power supply in field environments.

Read more...
The role of alarm annunciators in temperature monitoring
Omniflex Remote Monitoring Specialists Temperature Measurement
Director at alarm annunciator specialist, Omniflex explores the importance of alarm annunciators in temperature monitoring applications, drawing on examples from different industrial settings.

Read more...
Keeping an eye on invisible radiation
Omniflex Remote Monitoring Specialists Analytical Instrumentation & Environmental Monitoring
At its peak in 1994, the energy generation capacity of the UK’s nuclear power stations was 12,7 GW across 16 plants. In 2024, the capacity has fallen to around 5 GW, and the number of stations is down to nine. However, this is far from the end of the story as spent nuclear fuel remains radioactive for centuries, and requires rigorous safety processes to safeguard against leaks.

Read more...
Wireless communication system for remote access to data
KROHNE Data Acquisition & Telemetry
KROHNE has introduced the OPTIBRIDGE 3880 IIoT data logger for remote data services, acquisition and evaluation. It is a fully autonomous battery- or mains- powered wireless communication system for remote access to measurement data.

Read more...
New industrial tablet series for non-ex applications
Pepperl+Fuchs Data Acquisition & Telemetry
Pepperl+Fuchs is introducing a rugged tablet series in accordance with MIL-STD-810H. The slim Windows-based devices are available with a 20 or 25 cm display, offering numerous customisation options and an extensive range of accessories.

Read more...
Plant signal conditioning
Omniflex Remote Monitoring Specialists Flow Measurement & Control
Often, plant managers have a deep understanding of all the key operational challenges facing their facility, and have a broad knowledge of the instrumentation that can help solve them. However, they might not always be aware of the latest innovations that can make their lives even easier.

Read more...