Instrotech now offers Siko’s SGH wire-actuated encoders to measure stroke as well as speed in hydraulic cylinders.
The technology
The new SGH sensors use a wire draw mechanism that is integrated directly into the cylinder to measure the stroke. The wire is secured to the piston head and when the cylinder extends, the wire unwinds off its drum and pulls out. The resulting rotation of the drum is detected by the contactless sensor system and converted into a linear position. This means that precise and absolute position or speed tracking of the cylinder is possible at any time.
The magnets used to measure the rotation are scanned by the contactless sensor system through the pressure resistant base plate of the SGH sensors. The electronic components are fully encapsulated and located on the non-pressurised side of the system. The entire measuring system is therefore incorporated into the cylinder and optimally protected against external environmental influences. In contrast to measuring systems mounted externally on the cylinder, the sensor system cannot be damaged or affected by environmental conditions.
Intelligent sensors for smart cylinders
The SGH technology transforms hydraulic and telescopic cylinders as well as piston accumulators into smart cylinders and hydraulic systems. With measuring lengths of up to 5000 mm, a wide selection of interfaces as well as high flexibility for integration of the sensors, a suitable sensor is available for all applications.
Redundant options and sensors for performance levels of up to PLd are available for safety critical applications. In addition, the sensors supply process data which not only serves to satisfy safety requirements, but also offers an added value for the machine as the process data provides insight into any impending maintenance issues.
Flexible support tracking in crane and lifting applications extends the working ranges of such machines, while memory functions in industrial trucks save time and make work safer. All these are examples of how SGH sensors make machinery safer and more efficient (www.bit.ly/3mKWwll).
Compressed air treatment do’s and don’ts Artic Driers International
Pneumatics & Hydraulics
As a long-established importer and manufacturer of air dryers, Artic Dryers often sees the results of poor installation and issues with aftercoolers that create serious problems in air drying systems.
Read more...Next-gen air compressors for plastics manufacturer
Pneumatics & Hydraulics
Integrated Air Solutions has reinforced its partnership with global compressor manufacturer, ABC Compressors by facilitating the installation and commissioning of two next-generation direct-drive ABC machines for a prominent plastic manufacturer in South Africa.
Read more...Electrohydraulic shredding of galvanic waste
Pneumatics & Hydraulics
Galvanised parts are among the last big challenges for recycling. ImpulsTec is implementing shockwave or electrohydraulic shredding technology, for the separation of complex material compounds in industrial processes.
Read more...Revealing the value of filtration Hydrasales
Pneumatics & Hydraulics
The life and reliability of hydraulic systems are greatly affected by the presence of particulate contamination in the lubricant. However, in the face of potential contamination there is hope. The cleaner the fluid, the more reliable the system or process, and the longer the lifespan of its components.
Read more...Bushings for movie prop platforms
Pneumatics & Hydraulics
A provider of engineering services in the hydraulics and pneumatics industry anticipates new orders in 2025 for movie prop platforms that use Vesconite bushings with a low coefficient of friction.
Read more...Hydraulic pumps deliver high flow, convenience and precision Bearing Man Group t/a BMG
Pneumatics & Hydraulics
BMG’s range of high-performance hydraulic electric Enerpac E-pulse pumps is critical to all 700 bar operating hydraulic systems. These portable E-pulse pumps have intelligent auto-cycle functionality and an efficient power-to-weight ratio to ensure dependable operation and high productivity in challenging industrial applications.
Read more...Next-generation geothermal energy
Pneumatics & Hydraulics
Startup Fervo Energy just made hot-rock history. The company says it is the first to demonstrate that an enhanced geothermal system can reliably produce electricity.
Read more...Acoustic imaging detector for gas leaks and partial discharge Artic Driers International
Pneumatics & Hydraulics
The new SUTO iTEC S532 acoustic imaging detector provides an easy and effective way to locate pressurised air and gas leaks and partial discharge (PD) in industrial high-voltage environments.
Read more...Compressed air solutions for efficient pneumatic conveying
Pneumatics & Hydraulics
Moving goods through pipes from one point to another using air - pneumatic conveying - is an extremely efficient method of transporting a great variety of products, provided that the right system is used, and that it’s done correctly.
printer friendly version