September 2020Analytical Instrumentation & Environmental Monitoring
The SensoTech LiquiSonic is an inline analytical system for determining the concentration of binary liquids directly in the production process. The analyser is mostly used for phase separation and reaction monitoring in refineries, with sensor installation within the product stream, thus meaning an extremely fast measurement that responds immediately to process changes for optimum control.
Motor fuel alkylation using liquid hydrofluoric (HF) or sulphuric (H2SO4) acids is a catalytic process used in petroleum refinery operations. The purpose of the alkylation is to improve fuel properties to achieve higher octane for lower emissions which is an important process in petrochemical alkylation operations.
While the H2SO4 alkylation scores points with safety and environmental protection aspects, the HF alkylation typically shows efficient acid recycling. Olefins and the isoalkanes from raw oil resulting from fluid catalytic cracking (FCC) constitute the starting materials. Together with HF and/or H2SO4 as catalyst, high-grade alkylates are formed. Due to their high-octane rating, few aromatic compounds and comparably environmentally friendly properties, they are perfectly suitable for petrol blending from both an economic and an ecologic point of view.
The most important requirement for the alkylation system is error-free operation to prevent e.g. an ‘acid runaway’, which can occur when the acid strength goes below 85-87%. In this case the reactions between the olefins and the iso-butane turn into reactions of olefins only, producing polymers known as acid sludge, red oil or ASO (acid soluble oil). To prevent this, control of the acid, water and ASO quantity is of particular importance.
Traditional sampling is potentially very dangerous, time intensive and the results only arrive after some hours of laboratory testing. Here the LiquiSonic scores points with immediate inline analysis and data recording as well as increased system productivity and safety.
The robust LiquiSonic measuring technology has set benchmarks in 3-component analysis for years. Using select specialty materials, it effectively prevents corrosion, abrasion and drift, even under difficult conditions. The LiquiSonic immersion sensors can be easily installed directly into the pipeline and are ATEX-, IECEx- and FM-certified.
Possible installation locations include upstream and downstream of the acid separator, and at the alkylate outlet of the iso stripper. Despite difficult, corrosive process conditions, utilising materials such as Hastelloy C-276 or Monel, long-term system stability is possible.
Supporting fast, safe helicopter service across Sweden ATEQ South Africa
Analytical Instrumentation & Environmental Monitoring
In an environment with high risks and fierce competition, Storm Heliworks’ fleet of eight helicopters operates on assignments throughout Scandinavia. Maintenance is critical, and the company recently invested in a battery charger analyser from ATEQ Aviation.
Read more...WearCheck introduces advanced Legionella testing to safeguard water quality Wearcheck
Analytical Instrumentation & Environmental Monitoring
WearCheck Water has expanded its expertise in water analysis with the introduction of Legionella pneumophila detection and enumeration. This positions the company at the forefront of water and surface safety monitoring, ensuring businesses, industries, and public institutions can proactively manage legionella contamination risks.
Read more...Silo weighing made easy - new mounting kit for load cells
Analytical Instrumentation & Environmental Monitoring
The PR 6003 mounting kit features fast commissioning in demanding applications in industrial silo weighing. It combines maximum accuracy with maximum safety in a compact system.
Read more...Smart weighing boosts Bayer’s automation
Analytical Instrumentation & Environmental Monitoring
he new supply centre of the agricultural chemical and pharmaceutical company Bayer in Hangzhou integrates weighing technology of Minebea Intec for precise mixing and homogenisation in Zone 2 hazardous areas.
Read more...WearCheck Water wins accreditation for microbiological testing Wearcheck
Analytical Instrumentation & Environmental Monitoring
WearCheck Water’s Johannesburg laboratory was recently awarded ISO/IEC17025 accreditation for Total Coliforms and E.coli Testing after a rigorous audit process, adding to the company’s extensive list of certifications, and reinforcing the laboratory’s adherence to national and international work quality standards.
Read more...Advancing process weighing and weighbridge automation
Analytical Instrumentation & Environmental Monitoring
Sasco Africa, a leader in industrial weighing solutions, is showcasing its latest innovations in process weighing and weighbridge automation.
Read more...Analysis solutions for total organic carbon
Analytical Instrumentation & Environmental Monitoring
Prepare for the future of water quality monitoring with Hach’s industry-leading total organic carbon (TOC) analysis solutions.
Read more...Liquid density analyser Sensoquad
Analytical Instrumentation & Environmental Monitoring
The SensoTech LiquiSonic system measures the density or concentration of a liquid by calculating using the sonic velocity to give output in real-time.
Read more...Oxygen measurement in beverages
Analytical Instrumentation & Environmental Monitoring
[Sponsored] Anton Paar offers a complete range of oxygen measurement instruments for total package oxygen (TPO) measurements, at-line quality control (QC), and in-process monitoring. These instruments help beverage manufacturers achieve accurate, reliable oxygen control at every stage of production.
printer friendly version