Electrical Power & Protection


Five tips to manage energy use while staying at home

May 2020 Electrical Power & Protection

Covid-19 continues to impact many aspects of our lives. Many are now required to stay at home in an effort to curb the spread of the pandemic. One of the many implications of staying at home will be the changes in your home’s energy usage.

Historically, a family on average incurs $200 of energy bills a month in the US, for example. As many families around the world are required to stay at home, their home energy bills are expected to temporarily rise.

Understanding your current home energy use

Most of the energy used in homes goes towards maintaining indoor temperatures, heating water, providing lighting and operating the refrigerator. Many residential households rely on electricity and natural gas as the energy sources to power these and other amenities.

In recent decades, electricity has been the rising star in bringing energy to our homes. It kept gaining ground to first surpass the use of petroleum and more recently to surpass the use of natural gas as the primary form of energy in households.

Staying and working from home likely changes your energy-use pattern

The amount and timing of energy we use throughout the day at home changes, called your daily energy-use pattern. Commonly, energy use in residential dwellings peaks in early evening as more of us return from work to home, get dinner ready, watch television and adjust the indoor temperate to a pleasant level. Energy use bottoms during night hours as heating or cooling tends to be the only energy user.

As many are required to stay at or work from home during the ongoing lockdown, this daily energy-use pattern will likely change. It is expected the energy usage during daytime hours will increase considerably. This will be a result of more family members being present at home when they are normally at work or school. This will create the need for additional heating or cooling, more frequent use of hot water and increased appliance usage. The energy usage will likely increase during evening hours, too, but this will be a much less significant increase in comparison to the increase during day hours.

Five practical tips to manage energy use while you and your family are at home:

1. Heating and cooling tend to be the largest consumer of energy. If you need heating, consider lowering your thermostat by a degree or two to reduce your energy bills. Where applicable, you can keep your curtains or blinds open to take advantage of sunlight for heating. For the rooms not frequently used, you can consider adjusting air vents to decrease hot air flow into these rooms and close the doors. If you need cooling, consider raising the temperature by a degree or two and using fans to help circulate the air.

2. Refrigerators consume large amounts of electricity. Consider challenging yourself and your family to not open the refrigerator door as frequently. As many are required to stay at home, this means more people making frequent trips to the refrigerator for food and snacks. Consider setting up a family challenge. Tape a piece of paper on the fridge door and put a mark every time someone opens the door. Award the family member who opens the door the least.

3. Lighting continues to consume a considerable quantity of energy in households, even after all the recent improvements in energy-efficient lighting. Consider taping the switches in the ‘off’ position for the rooms with minimal usage. This will help you and everyone in the home avoid leaving lights on during the day in selected rooms. If you are an early riser and like working in the morning while it is still dark outside, consider setting an alarm on your phone to turn off all lights after sunrise so you don’t forget. If you have recently invested in smart home technology, consider setting schedules for your light fixtures to automatically turn off at pre-set times.

4. Heating water for showers, the dishwasher and washing machine is another area that consumes a sizable amount of energy. Consider lowering the water heater temperature towards the lowest setting and consolidating your washing loads to minimise the times the washing machine runs. Replicate this for your dishwasher.

5. Many home electronics continue to use electricity when turned off or in standby mode, hence the phrase ‘phantom loads’. Consider unplugging these devices while they are not in use. These devices include televisions, stereos, game consoles, cellphones, computers, computer accessories and beyond.

This is a very difficult time for everybody. The world is joining together to keep people healthy first and foremost. As many are required to stay at or work from home, we can all put an effort to manage our individual energy footprint.




Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Raptor switches
Phoenix Contact Electrical Power & Protection
The Phoenix Contact Raptor switches enable reliable and safe operation in extreme ambient conditions. The managed switch portfolio meets the stringent requirements of IEC 61850-3 and IEEE 1613 standards and is ideal for critical infrastructure and power supply applications.

Read more...
Half brick second generation converter
Vepac Electronics Electrical Power & Protection
The Supreme series half brick second generation converter from Vepac is composed of isolated, board-mountable, fixed switching frequency DC-DC converters that use synchronous rectification to achieve extremely high power conversion efficiency.

Read more...
Multimeters: the perfect entry-level choice
Comtest Electrical Power & Protection
Experience the precision, durability and safety of professional-grade test tools with the entry level Fluke 15B+ and 17B+ digital multimeters.

Read more...
South Africa can become an important EV manufacturer
Electrical Power & Protection
A year ago, South Africa was mired in loadshedding, with the importance and relevance of electric vehicles (EVs) far from the public imagination. Fast forward a year and much has changed

Read more...
Self-contained standalone lightning warning system
Senseca Electrical Power & Protection
Biral, now part of the Senseca Group, and a specialist in environmental and meteorological measurement instrumentation, has launched its BTD-200 lightning warning system, which is a complete detection and warning system.

Read more...
Compact, high density power protection system for AI, data centre and large-scale electrical workloads
Schneider Electric South Africa Electrical Power & Protection
Schneider Electric has launched its new Galaxy VXL – a highly efficient, compact, modular, scalable and redundant 500-1250 kW (400 V) 3-phase uninterruptible power supply (UPS), complete with enhanced cybersecurity, software and safety features.

Read more...
Taking the pain out of panel building
Omron Electronics Electrical Power & Protection
Panel building stands as a cornerstone of industrial automation, shaping the efficiency and reliability of automated systems across different and diverse industries, from manufacturing to infrastructure. Omron leverages over 80 years of experience to furnish OEMs and builders with cutting-edge control panel solutions.

Read more...
Powerless is not an option
Electrical Power & Protection
When the power goes out it is important for commercial and tertiary facilities to be able to keep essential electrical equipment running. UPS systems are critical for transitioning and emergency backup power.

Read more...
High-performance surface inspection systems for battery production
Electrical Power & Protection
As battery manufacturers increase their focus on yield optimisation to meet growing demand, AMETEK Surface Vision is highlighting the essential role of processes to improve quality and reduce defects.

Read more...
Securing the power supply
Electrical Power & Protection
Grid management systems are the linchpin of modern transmission and distribution networks. To understand the intricacies of grid management, it is necessary to unpack its core components: scada systems, energy management systems, outage management systems and wide area management systems.

Read more...