Data Acquisition & Telemetry


Traditional oscilloscopes overtaken by multifunction I/O devices

February 2003 Data Acquisition & Telemetry

National Instruments extends its simultaneous sampling multifunction I/O family with the introduction of its fastest 16-bit multifunction data acquisition (DAQ) devices for PXI and PCI. With the NI 6120 family of multifunction I/O DAQ devices, engineers and scientists can capture waveforms with better vertical resolution and frequency resolution than with traditional oscilloscopes.

The devices deliver 16-bit analog input at 800 kS/s on each of four channels for both transient measurements and frequency domain measurements. Users can synchronise onboard digital I/O and waveform output with the devices' 16-bit waveform acquisition for mixed signal and stimulus-response applications. These capabilities make the NI 6120 family an alternative to higher-priced standalone instruments for many applications that require flexible channel counts and synchronisation.

The NI PXI-6120 and NI PCI-6120 multifunction I/O devices come with 64 million samples of onboard memory to ensure data integrity. They also feature two 16-bit analog output channels, eight digital I/O lines, and two counter/timers. With the devices, engineers and scientists in research and design can record signals at a high resolution for a variety of applications, including frequency domain analysis.

The NI 6120 simultaneous sampling multifunction I/O devices come with NI-DAQ 6.9 driver software, a powerful programming interface for use with numerous programming environments and languages. Through NI-DAQ 6.9, the new devices integrate with popular application development environments, including NI LabVIEW, NI Measurement Studio for Visual Studio, Microsoft Visual C++, and Microsoft Visual Basic.

NI leads the industry movement to 16-bit DAQ devices by combining custom digital ASICs and custom analog input and output design to optimise, control, and enhance the performance of commercial off-the-shelf 16-bit analog to digital and digital to analog converters. NI 16-bit DAQ devices for PXI, PCI, FireWire, and PCMCIA deliver 16 times better resolution and significantly better accuracy at a marginal price difference when compared to 12-bit DAQ products.

For more information contact National Instruments South Africa, 011 805 8197, [email protected]





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

The industrial era of wireless telemetry and radio communication
Schneider Electric South Africa Data Acquisition & Telemetry
Today’s advanced wireless telemetry offers a range of benefits that go beyond cost savings, including greater flexibility and mobility, remote monitoring capabilities, and enhanced safety.

Read more...
Connecting every transport node
RJ Connect Editor's Choice Data Acquisition & Telemetry
Stockholm's bus system strategically links urban mainline, suburban mainline, non-mainline routes, community service buses and night buses. To acquire and process data from multiple sources and analyse onboard information on their moving buses, Transdev sought a dependable and powerful onboard computer. It teamed up with CatAB, Moxa’s local representative, known for delivering top-notch industrial data communication boards and equipment since 1988.

Read more...
Paratus South Africa boosts Tantum IT’s connectivity with Eutelsat
Data Acquisition & Telemetry
Tantum IT is a leading IT service provider specialising in remote IT management, cloud services, and secure data handling for industries in remote and high-demand environments. To overcome its connectivity challenges, Tantum IT chose Paratus, an official distributer of Eutelsat OneWeb’s Low Earth Orbit services, to provide the solution.

Read more...
Wireless communication system for remote access to data
KROHNE Data Acquisition & Telemetry
KROHNE has introduced the OPTIBRIDGE 3880 IIoT data logger for remote data services, acquisition and evaluation. It is a fully autonomous battery- or mains- powered wireless communication system for remote access to measurement data.

Read more...
New industrial tablet series for non-ex applications
Pepperl+Fuchs Data Acquisition & Telemetry
Pepperl+Fuchs is introducing a rugged tablet series in accordance with MIL-STD-810H. The slim Windows-based devices are available with a 20 or 25 cm display, offering numerous customisation options and an extensive range of accessories.

Read more...
New wireless communication system for remote access to measurement data
KROHNE Data Acquisition & Telemetry
KROHNE has introduced the OPTIBRIDGE 3880 IIoT data logger for remote data services, acquisition and evaluation. This is a fully autonomous, battery- or mains-powered wireless communication system for remote access to measurement data, aimed at the water and wastewater industry.

Read more...
Programmable LED indicators
Turck Banner Southern Africa Industrial Wireless Data Acquisition & Telemetry
Turck Banner is expanding its portfolio of LED lights with the robust LED indicators of the K100 series. These units improve workflow and reduce downtime through clearly communicated status information.

Read more...
Decoding the world of direct part marks
Omron Electronics Data Acquisition & Telemetry
OMRON has unveiled its latest breakthrough, the V450-H ultra-rugged handheld scanner. Tailored specifically for industrial DPM reading, this innovative device sets new industry standards for durability and performance.

Read more...
Green manufacturing energy conservation and emission reduction
Dahua Technology South Africa Data Acquisition & Telemetry
As a world-leading video-centric AIoT solution and service provider, Dahua is committed to improve its sustainable development capabilities and to make continuous efforts in building a greener and safer digital world by developing innovative solutions that can help conserve energy and reduce carbon emission.

Read more...
Adding value in a Heartbeat
Endress+Hauser South Africa Data Acquisition & Telemetry
This Endress+Hauser technology provides enhanced measuring reliability and safety, higher efficiency in operation, productivity gains and compliance, and fewer unplanned shutdowns.

Read more...