Miniature housings for packaging electronics
February 2003
Enclosures, Cabling & Connectors
Erni fully insulated terminal housings meet requirements falling between single card enclosures and 19" racks. Suitable for housing microcomputer systems, electronic control, fault signalling systems, distributed control modules, data transmission systems and the like, they meet machine construction and automotive industry regulations with safe-touch terminals, are easy to assemble and dismantle and can be furnished with ventilation holes in the polycarbonate base.
The smaller range of LDG-A housings provide a facility for insertion of two longitudinally aligned boards and on board as cross connection and as location for control and display elements. The housing bases can be screwed onto mounting panels and have a snap-on fixing to standard DIN 46277 rails and DIN EN 50022 rack assemblies. They afford IP40/IP20 protection with/without mounted terminals and can be used over an ambient temperature range of -40 to +110°C. Units have a standard height of 110 mm, length of 75 mm and come in widths of 22,5, 45, 55, 99,7, 150 and 225 mm having 12, 14, 16, 30, 46, and 70 terminals respectively.
LDG-A expansion elements include an aluminium covering for the housing base that serves as a mounting and guide element for PC boards and the output plug; a frame insert; a plug insert with an integrated 17 pole multipoint connector; and a blanking insert for complete covering of the base housing. Depending on assembly, the frame insert offers a maximum mounting area for components or additional fitting of a transverse board.
The larger LDG-D series of housings are available in three sizes with 6, 10, and 20 terminals with standard length of 70 mm, width of 25, 50, and 100 mm and heights of 130/100 mm. Almost all direct connectors such as DIN 41612, 41613, 41617 or 41651 can be fitted, as well as other families, using mounting bars or suitably pre-assembled units.
A further series of compact LDG-M4 housing constructed to DIN EN 50041 provide insulated cubic enclosures for proximity switches and momentary-contact limit switches. These can be screwed down or fitted with an adapter for rail mounting. Overall dimensions are 94 x 42 x 42,5 mm. Full details of the LDG range are available in individual data sheets.
Further reading:
Cables and wires for food and beverage
LAPP Southern Africa
Enclosures, Cabling & Connectors
The strict hygiene regulations for handling foodstuffs stipulate particularly complex requirements for electrical components. The cables and accessories used must withstand a wide range of chemical, thermal and mechanical loads, and also function perfectly at all times in refrigerated and damp rooms.
Read more...
Redefining mobility for fibre cabling
Legrand
Enclosures, Cabling & Connectors
As data volumes rapidly increase globally, specialists need to take an urgent look at IT and network infrastructure, with a particular focus on vital equipment like servers, racks and fibre cabling. The Legrand team believes that advanced fibre cabling solutions, which have been developed to simplify deployment, lower costs, improve performance and enable greater densities, will efficiently meet future capacity demands.
Read more...
High-speed data transmission
Enclosures, Cabling & Connectors
Data protocols are constantly evolving to enable interoperability and reliable transfer of increasing amounts of data at the highest speeds between more and more connected devices. To address this technological challenge, Fischer Connectors is expanding its platform capabilities to meet the most demanding connectivity requirements for high-speed data transfer.
Read more...
Robust Ethernet cordset cables
Turck Banner Southern Africa
Enclosures, Cabling & Connectors
Turck Banner offers a product range comprising a wealth of different connectors and cables, including over 115 000 connection technology solutions with differing degrees of complexity.
Read more...
What you need to know when you start using hydrogen as your fuel source
Parker Hannifin - Sales Company South Africa
Enclosures, Cabling & Connectors
OEMs are taking a more serious look at hydrogen options. Although much of the market is still focused on the potential of battery-powered vehicles, hydrogen fuel cell vehicles offer a viable supplement that is better suited for longer ranges and faster refuelling.
Read more...
SEW-EURODRIVE closes the loop with complete panel solutions
SEW-EURODRIVE
Enclosures, Cabling & Connectors
In addition to its quality range of geared motors and related solutions, SEW-EURODRIVE South Africa is ‘closing the loop’ of its products by offering customers electrical control panels as part of the package.
Read more...
Simplify control panel connections
Turck Banner Southern Africa
Enclosures, Cabling & Connectors
Panel builders have new tools for bringing power and signals back into protected areas with Turck Banner’s M8 and M12 receptacles.
Read more...
Control cabinet-free automation
Beckhoff Automation
Enclosures, Cabling & Connectors
As a replacement for the conventional control cabinet, the MX-System from Beckhoff offers some major efficiency advantages. It also provides a great deal of optimisation potential in terms of the increasing shortage of skilled workers and the expanding presence of DC supply networks across the industry.
Read more...
Cable protection for longer runs
igus
Enclosures, Cabling & Connectors
Polymer energy chain manufacturer, igus has introduced a new lighter weight e-chain for cable management and protection applications with large unsupported lengths and high fill weights. This was previously the domain of larger, more expensive energy chains.
Read more...
Panel building should be streamlined
Schneider Electric South Africa
Enclosures, Cabling & Connectors
Data centres run critical applications, and require equipment and infrastructure that operate at 100% uptime, as any downtime due to faulty components could have catastrophic ramifications.
Read more...
printer friendly version