Analytical Instrumentation & Environmental Monitoring


Precise chloride and sulphate monitoring

March 2019 Analytical Instrumentation & Environmental Monitoring

Chlorides and sulphates cause pitting and stress corrosion in expensive power plant components, such as turbines and boilers, leading to extensive maintenance and unplanned shutdowns. Monitoring these ions at low ppb levels is therefore a key measurement in power plant chemistry.

Mettler Toledo Thornton’s 3000CS analyser is an on-line instrument for direct measurement of chlorides and sulphates in pure water and power cycle chemistry samples. The analyser continuously monitors these highly corrosive contaminants to assist in corrosion control and minimising damage to critical power plant equipment. Early, unambiguous detection of trace levels of chloride and sulphate ions is provided with minimal operator supervision.

Controlling chloride and sulphate in power plants

The 3000CS analyser automatically performs direct chloride and sulphate measurements in the water/steam cycle. The most important point in the cycle is at the turbine inlet, to ensure that only acceptable levels of chlorides and sulphates enter with the steam into the turbine. For boiler feedwater monitoring, the analyser ensures low ppb levels of contaminants. For condensate monitoring, it detects breakthrough at condensate polisher of contaminants and deterioration of sulphated cation resin. Low chloride and sulphate levels are ensured in makeup water by monitoring them after all treatment stages, before the water is sent to the storage tank that feeds the water/steam cycle.

Low cost of ownership: typically, chloride and sulphate measurements are done with off-line technologies, such as ion chromatography and inductively coupled plasma. The 3000CS provides accurate chloride and sulphate measurements continuously, delivering a rapid return on investment by eliminating the need for costly internal or external lab tests.

Easy to maintain with ISM predictive diagnostics: the unit features semi-automatic calibration and an intuitive touchscreen interface. Intelligent Sensor Management (ISM) technology provides diagnostics that predict when maintenance or replacement of consumables will be required.

For more information contact Darren Prinsloo, Microsep, +27 11 553 2300, [email protected], www.microsep.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Elevating mining separation processes through precision instrumentation
Endress+Hauser South Africa Analytical Instrumentation & Environmental Monitoring
In mining operations, the quest for efficiency and productivity is key. There is an urgent need for innovative solutions to enhance the performance of extraction processes while balancing operational costs and environmental impact.

Read more...
Alfa Laval launches next generation
Analytical Instrumentation & Environmental Monitoring
Alfa Laval has launched Clariot, a next generation, AI-based condition monitoring solution, precision-built for hygienic process equipment to deliver more accurate analysis and support.

Read more...
The next generation in metal sorting
Mecosa Analytical Instrumentation & Environmental Monitoring
In the metal recycling industry, companies are increasingly challenged to not only improve the efficiency of their processes but also to raise the quality and purity of the sorted materials to new levels. By integrating proven spectral analysis technology into its market-leading REDWAVE XRF sorting system, REDWAVE is unlocking new opportunities for metal recycling, particularly in aluminium recovery.

Read more...
Ensuring clean and safe water
Endress+Hauser South Africa Analytical Instrumentation & Environmental Monitoring
Endress+Hauser’s comprehensive range of disinfection sensors are designed to monitor and control disinfectant levels in water treatment processes.

Read more...
Inline OCR measurement systems for real-time oil monitoring in refrigerants
Analytical Instrumentation & Environmental Monitoring
[Sponsored] Anton Paar’s L-Sonic 6100 offers a reliable, real-time inline measurement solution for monitoring the oil circulation ratio in cooling and refrigeration systems.

Read more...
Anton Paar launches inline refractometers for precision Brix monitoring
Anton Paar Analytical Instrumentation & Environmental Monitoring
[Sponsored] Anton Paar has introduced innovative inline refractometers that are designed for continuous Brix concentration monitoring in metalworking machines, fruit and vegetable processing and other industrial processes.

Read more...
Supporting fast, safe helicopter service across Sweden
ATEQ South Africa Analytical Instrumentation & Environmental Monitoring
In an environment with high risks and fierce competition, Storm Heliworks’ fleet of eight helicopters operates on assignments throughout Scandinavia. Maintenance is critical, and the company recently invested in a battery charger analyser from ATEQ Aviation.

Read more...
WearCheck introduces advanced Legionella testing to safeguard water quality
Wearcheck Analytical Instrumentation & Environmental Monitoring
WearCheck Water has expanded its expertise in water analysis with the introduction of Legionella pneumophila detection and enumeration. This positions the company at the forefront of water and surface safety monitoring, ensuring businesses, industries, and public institutions can proactively manage legionella contamination risks.

Read more...
Silo weighing made easy - new mounting kit for load cells
Analytical Instrumentation & Environmental Monitoring
The PR 6003 mounting kit features fast commissioning in demanding applications in industrial silo weighing. It combines maximum accuracy with maximum safety in a compact system.

Read more...
Inline beverage analyser leverages advanced multi-parameter technology
Analytical Instrumentation & Environmental Monitoring
[Sponsored] The Cobrix 7501/7601 inline beverage analyser leverages advanced multi-parameter technology to enhance quality control in carbonated soft drink production.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved