Replace the sleeve on a pinch valve in 80 minutes
January 2018
Maintenance, Test & Measurement, Calibration
The standard practice for replacing a sleeve in any pinch valve is to remove the valve from the line, which requires the use of a crane for all but the smallest valves. The valve is then stripped – the sleeve replaced – and the valve rebuilt. It is then reinstalled in the line, a process that can take several hours at best requiring the attention of several fitters and millwrights.
With the patented Red Roc Hi-Lift feature, the valve remains in the line and the sleeve can be replaced in a much shorter time with only two fitters.
On 15 September 2017 at a nickel mine in Mpumalanga a Red Roc valve sleeve was changed in 80 minutes and reduced the plant downtime by at least 10 hours.
“The process is simple and only involves removing the bolts holding the top half of the body in the line and slackening the ones in the bottom half. Jacking bolts on the valve flanges spread them from the pipe flanges, loosening the sleeve, so that it can be removed in line. The quick release clamps holding the two halves together are removed. The top half is then raised using the two hydraulic cylinders mounted on the bridge and operated by a hand pump. In the raised position the old sleeve can be lifted out and the new one fitted in position. The process is then reversed with the body being allowed to drop by releasing the oil in the cylinders back to the reservoir – the clamps are refitted and line bolting replaced,” said Gregor Hopton, Afrivalve’s group marketing manager.
The Red Roc Hi-Lift pinch valves are manufactured by Afrivalve, a division of eDART Slurry Valves at its facilities in Jet Park. The range includes sizes from DN150-DN600 with larger sizes available on request.
For more information contact Gregor Hopton, Afrivalve, +27 (0)11 791 1411, [email protected], www.afrivalve.co.za
Further reading:
WearCheck leads the way in condition monitoring
Wearcheck
Maintenance, Test & Measurement, Calibration
Minimising maintenance costs of mining and power-generating machinery and maximising its operational efficiency – these goals form the foundation of the proactive/preventive maintenance services provided by the expert technicians at condition monitoring specialist, WearCheck.
Read more...
Collect data three times faster
SKF South Africa
Maintenance, Test & Measurement, Calibration
SKF has extended its renowned Microlog Analyzer family of data collection devices with the addition of the Microlog Analyzer dBX. Currently SKF’s most powerful diagnostic tool, this cutting-edge device redefines diagnostic capabilities, enabling users to take measurements three times faster than its predecessor.
Read more...
Integrated liners for the mining industry
Maintenance, Test & Measurement, Calibration
Multotec has developed a range of composite integrated mill liners in response to the needs of local and international mining clients.
Read more...
The criticality of maintenance in the water and wastewater segment
Schneider Electric South Africa
Maintenance, Test & Measurement, Calibration
In a time of water shedding, climate change and ageing infrastructure, the importance of maintenance and support in the water and wastewater segment cannot be overstated.
Read more...
How dry ice blasting is revolutionising the mining industry
Maintenance, Test & Measurement, Calibration
Dry ice blasting has emerged as a game-changing technology for the mining industry, offering a range of advantages that are reshaping traditional cleaning methods.
Read more...
Quality test tools save costs at pulp and paper mill
Comtest
Editor's Choice Maintenance, Test & Measurement, Calibration
A case study on how preventive maintenance and a few good test tools avoided unnecessary motor replacements at a pulp and paper company.
Read more...
The logical solution to oil and gas industry corrosion
Maintenance, Test & Measurement, Calibration
The consequences of corrosion in the oil and gas industry can be astronomical. The simple culprit is metal reacting with oxygen and moisture, degrading it back to its natural state.
Read more...
Lube tip: foaming is affected by oil level
Wearcheck
Maintenance, Test & Measurement, Calibration
In a circulating system, it is crucial to check the oil level before introducing anti-foam agents to address a foaming problem.
Read more...
Microfine filtration boosts fuel quality and reduces equipment failure
Maintenance, Test & Measurement, Calibration
The path to contamination-free fuels relies on a combined effort from refiners to transporters, storage depots, handlers and end users. Prior to use, fuels can be polished with multi-pass microfine filtration systems such as those exclusively manufactured by ISO-Reliability Partners.
Read more...
Supporting capital investment in machinery
Maintenance, Test & Measurement, Calibration
Industrial and mining operations are under increased financial pressure in the current economic and social climate in South Africa. This means that when businesses make capital investments in new equipment, they need to be sure that the machinery will function optimally for as long as possible.
Read more...
printer friendly version