Aventics presents Clean Line cylinder series
October 2017
Pneumatics & Hydraulics
Aventics has recently expanded its actuator product range for applications with high hygiene requirements and now offers a solution to meet the strict requirements placed of the food and pharmaceutical industries.
The new Aventics cylinders comply with all relevant European standards for applications in food splash zones. Both the CCL-IS standard cylinder to ISO 15552, and the CCL-IC compact cylinder to ISO 21287, correspond to the basic principles of hygienic design: the cylinder bodies consist of anodised aluminium, while the screws and piston rod are made of stainless steel. The scraper material and the lubricants are also FDA-approved.
The CCL-IS standard cylinder is available in eight sizes, covering diameters from 25 to 125 mm. The maximum stroke is 2750 mm. Depending on their requirements, users can choose between elastic and pneumatic cushioning. ST6 series proximity sensors can be installed in just a few steps, without the need for any special tools. The ST6 sensor series includes a wide range of versions with different line lengths and connections. A special feature of the new cylinder series is the option to configure the air connections either on the cover or the base or both. Supply air and exhaust on one side increase flexibility for engineers, especially since the connections can be changed later on. The unused air connections are sealed off with locking screws.
With nine sizes, the CLC-IC compact cylinder covers a wide range with diameters from 16 to 100 mm. This gives engineers a maximum degree of freedom, since they can exert both lower and higher forces. The maximum stroke of the compact cylinder is 500 mm, and is measured by a proximity sensor from the ST6 family tailored to the application. The CCL-IC can be mounted directly, without any additional fastening elements and with the Aventics Engineering Tools, users can configure Clean Line cylinders online.
For more information contact Malan Bosman, Tectra Automation, +27 (0)11 974 9400, [email protected], www.hytecgroup.co.za
Further reading:
Compressed air treatment do’s and don’ts
Artic Driers International
Pneumatics & Hydraulics
As a long-established importer and manufacturer of air dryers, Artic Dryers often sees the results of poor installation and issues with aftercoolers that create serious problems in air drying systems.
Read more...
Next-gen air compressors for plastics manufacturer
Pneumatics & Hydraulics
Integrated Air Solutions has reinforced its partnership with global compressor manufacturer, ABC Compressors by facilitating the installation and commissioning of two next-generation direct-drive ABC machines for a prominent plastic manufacturer in South Africa.
Read more...
Electrohydraulic shredding of galvanic waste
Pneumatics & Hydraulics
Galvanised parts are among the last big challenges for recycling. ImpulsTec is implementing shockwave or electrohydraulic shredding technology, for the separation of complex material compounds in industrial processes.
Read more...
A leap forward in electrohydrostatic pump technology
Customized Motion Controls
Pneumatics & Hydraulics
Moog has launched the EPU-G, the latest addition to its Electrohydrostatic Pump Unit portfolio.
Read more...
Revealing the value of filtration
Hydrasales
Pneumatics & Hydraulics
The life and reliability of hydraulic systems are greatly affected by the presence of particulate contamination in the lubricant. However, in the face of potential contamination there is hope. The cleaner the fluid, the more reliable the system or process, and the longer the lifespan of its components.
Read more...
Bushings for movie prop platforms
Pneumatics & Hydraulics
A provider of engineering services in the hydraulics and pneumatics industry anticipates new orders in 2025 for movie prop platforms that use Vesconite bushings with a low coefficient of friction.
Read more...
Hydraulic pumps deliver high flow, convenience and precision
Bearing Man Group t/a BMG
Pneumatics & Hydraulics
BMG’s range of high-performance hydraulic electric Enerpac E-pulse pumps is critical to all 700 bar operating hydraulic systems. These portable E-pulse pumps have intelligent auto-cycle functionality and an efficient power-to-weight ratio to ensure dependable operation and high productivity in challenging industrial applications.
Read more...
Next-generation geothermal energy
Pneumatics & Hydraulics
Startup Fervo Energy just made hot-rock history. The company says it is the first to demonstrate that an enhanced geothermal system can reliably produce electricity.
Read more...
Acoustic imaging detector for gas leaks and partial discharge
Artic Driers International
Pneumatics & Hydraulics
The new SUTO iTEC S532 acoustic imaging detector provides an easy and effective way to locate pressurised air and gas leaks and partial discharge (PD) in industrial high-voltage environments.
Read more...
Compressed air solutions for efficient pneumatic conveying
Pneumatics & Hydraulics
Moving goods through pipes from one point to another using air - pneumatic conveying - is an extremely efficient method of transporting a great variety of products, provided that the right system is used, and that it’s done correctly.
Read more...
printer friendly version