Data Acquisition & Telemetry


Allpronix provides a simple solution

July 2016 Data Acquisition & Telemetry

An Allpronix customer recently found itself in a predicament where it needed to monitor a flowmeter remotely, but also record the data on site with a paperless recorder.

The RTU already installed on site performed the function by reading the flow rate from the flowmeter’s Modbus register. The problem was that the electromagnetic flowmeter the customer had purchased did not give a mA output signal, which is required by the paperless recorder.

The solution was to introduce a device that could connect to the same Modbus network as the RTU, receive the flow rate from the RTU (Modbus master) and produce a mA output signal to allow the recorder to log the flow rate on a SD card.

The Datexel DAT9011-USB was chosen for its capability to act as a Modbus master or slave, to perform the computation required without the need for add-on modules and the versatility it offers for possible future expansion.

The intelligent module is able to control a network of slave Modbus RTU devices connected on a serial RS-485 line. It can execute the reading and writing of the field values and perform the logical and mathematical functions necessary for system operation and the management of up to eight data storage tasks.

The data is saved on a USB memory stick and it is possible to access the saved files by means of the Ethernet connection. The device is equipped with one universal analog input channel, one channel for volt and mA input, two digital inputs and two relay outputs. An auxiliary source is also available to supply sensors in the field.

By means of the Ethernet interface, or the RS-485 slave or RS-232 ports, it is possible to read and write the internal register values in real time. Moreover, it is also possible to program the control logic and request real-time data from the slave devices.

For more information contact Jurie Weidemann, Allpronix, +27 (0)11 795 9500, [email protected], www.allpronix.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

The industrial era of wireless telemetry and radio communication
Schneider Electric South Africa Data Acquisition & Telemetry
Today’s advanced wireless telemetry offers a range of benefits that go beyond cost savings, including greater flexibility and mobility, remote monitoring capabilities, and enhanced safety.

Read more...
Connecting every transport node
RJ Connect Editor's Choice Data Acquisition & Telemetry
Stockholm's bus system strategically links urban mainline, suburban mainline, non-mainline routes, community service buses and night buses. To acquire and process data from multiple sources and analyse onboard information on their moving buses, Transdev sought a dependable and powerful onboard computer. It teamed up with CatAB, Moxa’s local representative, known for delivering top-notch industrial data communication boards and equipment since 1988.

Read more...
Paratus South Africa boosts Tantum IT’s connectivity with Eutelsat
Data Acquisition & Telemetry
Tantum IT is a leading IT service provider specialising in remote IT management, cloud services, and secure data handling for industries in remote and high-demand environments. To overcome its connectivity challenges, Tantum IT chose Paratus, an official distributer of Eutelsat OneWeb’s Low Earth Orbit services, to provide the solution.

Read more...
Wireless communication system for remote access to data
KROHNE Data Acquisition & Telemetry
KROHNE has introduced the OPTIBRIDGE 3880 IIoT data logger for remote data services, acquisition and evaluation. It is a fully autonomous battery- or mains- powered wireless communication system for remote access to measurement data.

Read more...
New industrial tablet series for non-ex applications
Pepperl+Fuchs Data Acquisition & Telemetry
Pepperl+Fuchs is introducing a rugged tablet series in accordance with MIL-STD-810H. The slim Windows-based devices are available with a 20 or 25 cm display, offering numerous customisation options and an extensive range of accessories.

Read more...
New wireless communication system for remote access to measurement data
KROHNE Data Acquisition & Telemetry
KROHNE has introduced the OPTIBRIDGE 3880 IIoT data logger for remote data services, acquisition and evaluation. This is a fully autonomous, battery- or mains-powered wireless communication system for remote access to measurement data, aimed at the water and wastewater industry.

Read more...
Programmable LED indicators
Turck Banner Southern Africa Industrial Wireless Data Acquisition & Telemetry
Turck Banner is expanding its portfolio of LED lights with the robust LED indicators of the K100 series. These units improve workflow and reduce downtime through clearly communicated status information.

Read more...
Decoding the world of direct part marks
Omron Electronics Data Acquisition & Telemetry
OMRON has unveiled its latest breakthrough, the V450-H ultra-rugged handheld scanner. Tailored specifically for industrial DPM reading, this innovative device sets new industry standards for durability and performance.

Read more...
Green manufacturing energy conservation and emission reduction
Dahua Technology South Africa Data Acquisition & Telemetry
As a world-leading video-centric AIoT solution and service provider, Dahua is committed to improve its sustainable development capabilities and to make continuous efforts in building a greener and safer digital world by developing innovative solutions that can help conserve energy and reduce carbon emission.

Read more...
Adding value in a Heartbeat
Endress+Hauser South Africa Data Acquisition & Telemetry
This Endress+Hauser technology provides enhanced measuring reliability and safety, higher efficiency in operation, productivity gains and compliance, and fewer unplanned shutdowns.

Read more...