Sensors & Transducers


Telco sensors overcome tough challenges

October 2015 Sensors & Transducers

Some of the toughest challenges for sensors are found in the pulp and paper industry, where high temperatures and a contaminated environment make it difficult for optical sensors to operate accurately and reliably. To overcome this, Telco has introduced the SS01 light curtain system which consists of a self-contained transmitter SST and the receiver SSR which are positioned opposite each other. The detectors are housed in a sturdy aluminium profile with T-slot mounting rail, available in lengths ranging from 160 to 1980 mm.

The series is available with a 12-30 VDC supply voltage with a solid state relay output, in light operated mode. The system is configurable to operate with either parallel or cross scanning beams which is selectable via a control input in the SSR. The SS 01 series features beam blanking function which is configurable using a second control input to the SSR. A test input to the SST may be used for either disabling or enabling the transmitting power for test purposes.

The advanced automatic sensitivity adjustment ensures that no onsite set up or adjustments are required. The signal level of each individual channel is adjusted automatically, which compensates for misalignment and contamination during operation. The transmitter and receiver are electrically synchronised by wire connection. The system is intended for static applications.

Both the transmitter and receiver detectors are protected against reverse polarity of power supplies, control inputs and output signals. The output is also protected against short circuit and inductive loads. Other features include:

• 0-10 metre sensing range.

• 4 to 384 channels (parallel beams).

• 10 to 1150 cross scanning beams.

• Plug connection.

• Automatic sensitivity adjustment.

• Power, output and system status indicators.

• High switching frequency.

Typical applications include log detection, level control of woodchips and pulp, paper break detection and edge control

For more information contact Gail Norton Instrumentation Agencies,+27 (0)31 701 4861, [email protected], www.gailnortoninstrumentation.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

New range of vision units
Beckhoff Automation Sensors & Transducers
Beckhoff has added four new vision units to its VUI2000 series. They integrate a camera, illumination and liquid lens technology for simplified installation.

Read more...
Condition monitoring sensor
Sensors & Transducers
The Balluff BCM Gen2 Condition Monitoring Sensor is an advanced IIoT-ready device designed for real-time machine health monitoring.

Read more...
Inductive IO-Link sensors
Turck Banner Southern Africa Sensors & Transducers
Turck Banner is expanding its sensor range, with inductive measuring sensors with IO-Link and an analogue output for flush and non-flush mounting.

Read more...
Value of PDS grows with data and sensing technology
Sensors & Transducers
Rapidly developing technology is constantly being harnessed by proximity detection systems (PDS) to deliver steadily improved functionality to customers. Booyco Electronics sees improved PDS solutions being developed, such as the combination of multiple different sensing technologies into a single fully integrated solution.

Read more...
Pulp fiction or pulp precision?
VEGA Controls SA Sensors & Transducers
The density of fruit concentrate has a direct impact on the flavour, texture and overall quality of the final product. The VEGA Minitrac 31, VEGASOURCE 31, and the KV 31 mounting bracket present a failproof solution that effectively addresses the technical complexities associated with high temperature, viscosity and fouling.

Read more...
Telco sensors in the pulp and paper industry
Gail Norton Instrumentation Sensors & Transducers
The pulp and paper industry poses a major problem for most photoelectric sensors. The high level of contamination in these dusty, dirty and grimy environments makes it impossible for most competing sensors to operate and sense reliably and efficiently.

Read more...
Vibration monitoring with IO-Link
ifm - South Africa Sensors & Transducers
Machine vibrations are important indicators when it comes to assessing the current condition of a machine. fm’s new and smart IO-Link vibration sensor helps to implement a simple and scalable condition monitoring approach using only a single device.

Read more...
Unique industrial asset monitoring solution
WIKA Instruments Sensors & Transducers
WIKA WikaPredict offers a unique industrial asset monitoring solution, combining advanced sensors and artificial intelligence. As a leader in predictive maintenance, it helps clients enhance operational performance and increased efficiency.

Read more...
Duct and plant room air quality (PRAQ) sensors
Schneider Electric South Africa Sensors & Transducers
Schneider Electric South Africa offers a comprehensive range of SpaceLogic duct and plant room air quality sensors. These cutting-edge sensors are designed to enhance building air quality and energy efficiency by combining multiple sensing capabilities into a single unit.

Read more...
The sensory reaction of the BMS
Schneider Electric South Africa Sensors & Transducers
Today’s building management systems cannot function properly without sensors. Like our senses, they are an integral part of operations that run silently in the background, almost taken for granted.

Read more...