Flow Measurement & Control


In-line water measurement of up to six parameters

October 2001 Flow Measurement & Control

Siemens Environmental Systems now produces Censar, which it believes is a new concept in liquid measurement. By using the various electronic configurations, up to six parameters can be measured including dissolved oxygen, chlorine, pH, Redox, conductivity and temperature. Censar is well suited to final effluent, surface water, wastewater and river water intake monitoring.

Direct reagent-free measurement of chlorine and membrane-free measurement of dissolved oxygen are possible. The unit requires little maintenance and it operates with a single array for cost-effective multiparameter measurement.

Censar is capable of direct in-pipe insertion up to 1,6 MPa (16 bar) pressure and probe insertion into a flow cell for process applications. Local signal processing of electronics with analog or digital outputs including local display options is also possible. Measurement ranges include chlorine 0-5 mg/l, dissolved oxygen 0-20 mg/l or 0-200% saturation, temperature 0-50°C, conductivity 0,1 to 10,0 mS/cm, pH 2 to 12 and Redox -1,4 to +1,4 V.

The Censar chip is 25 mm square and connects to spring loaded terminals in the probe housing for quick and easy replacement. Its electrochemical technology is based on the use of thick and thin film layers printed onto a ceramic substrate. Thick film layers are produced using specialised conductive and dielectric inks, screen-printed and heat cured.

Compact in design, the probe head is 37 mm in diameter and is pressure tested to 2,5 MPa (25 bar) and it has a 1,6 MPa (16 bar) continuous rating. Siemens Environmental Systems Limited is represented locally by OEN Enterprises.

OEN Enterprises

(011) 792 2859

[email protected]

www.oenenterprises.co.za





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Radiometric density measurements
Mecosa Flow Measurement & Control
Radiometric density measurements are used wherever conventional measurement techniques fail. Successful applications can be found in a wide variety of industries, especially where harsh process environments and difficult measuring conditions prevail.

Read more...
Battery-powered magmeter
Flow Measurement & Control
The RWEM/D battery-powered electromagnetic flow meter from Royce Water Systems is ideal for water and wastewater systems located at remote sites.

Read more...
Precise process and maximum savings with VEGABAR
VEGA Controls SA Flow Measurement & Control
Accurate measurementsof differential pressure is crucial for safety, efficiency and optimising operational processes. For over 40 years, VEGA has supplied industry-leading pressure measurement solutions, establishing itself as a trusted expert with a proven track record in sensor technology.

Read more...
Innovative solutions for low flow dosing with high precision
Mecosa Flow Measurement & Control
n the food, pharma, and chemical manufacturing industries, precision and efficiency are of utmost importance. Bronkhorst High-Tech has developed a flexible solution that meets today’s requirements for highly accurate dosing, whether continuous, in ratio, or in batches.

Read more...
Battery-powered magmeter
Flow Measurement & Control
The RWEM/D battery-powered electromagnetic flow meter from Royce Water Systems is ideal for water and wastewater systems located at remote sites.

Read more...
Smart technology for municipal services
VEGA Controls SA Flow Measurement & Control
A new wave of smart technologies has emerged from VEGA Instruments, promising a revolutionary impact on the efficiency and dependability of municipal services.

Read more...
Sustainable journey with hydrogen
Mecosa Flow Measurement & Control
Bronkhorst High-Tech, the Dutch leader in flow measurement and control, has been focusing on hydrogen applications in the renewable energy market for some time, and for good reason.

Read more...
Optimise sludge treatment and reduce operational costs
Endress+Hauser South Africa Flow Measurement & Control
The Endress+Hauser inline measuring devices, the Proline Teqwave MW 300 and the Proline Teqwave MW 500, determine the total solids content of wastewater directly through microwave transmission.

Read more...
No more blind spots in flow measurement of liquid foods
ifm - South Africa Flow Measurement & Control
The SM Foodmag magnetic-inductive flow sensor takes the flow measurement of liquid and creamy foods to a new level.

Read more...
Plant signal conditioning
Omniflex Remote Monitoring Specialists Flow Measurement & Control
Often, plant managers have a deep understanding of all the key operational challenges facing their facility, and have a broad knowledge of the instrumentation that can help solve them. However, they might not always be aware of the latest innovations that can make their lives even easier.

Read more...