Moxa has released the AWK-3131 and AWK-4131 series, two high-bandwidth 3-in-1 industrial wireless AP/bridge/clients that provide complete and secure wireless coverage both indoors and out. Both series are fully compliant with the IEEE 802.11n standard for a maximum bandwidth of 300 Mbps, and are backwards-compliant with existing 802.11 a/b/g deployments. The combination of expanded bandwidth and rugged industrial design exhibited by these new products ensure the highest reliability for data transmission.
IEEE 802.11n
To meet the growing need for video and voice streaming applications, wireless networking products are needed that support higher bandwidths and reliability. Moxa’s 802.11n products not only boast high-speed wireless data rates, but also ensure robust connections by using a combined technique of MIMO (multiple input, multiple output), channel bonding/40 MHz and frame aggregation. MIMO is the key technology for enhanced data rates in 802.11n networks. It enables a link where both the transmitting and the receiving ends are equipped with multiple antennas, which creates multiple paths for the radio signals. This technology maximises the data rate on the transmission end and eliminates the effects of the multipath fading on the receiving end for improved wireless range and reliability. The 802.11n standard couples MIMO technology with the channel bonding/40 MHz operation in the physical layer, which bonds two 20 MHz channels together to increase the bandwidth that is available for data transfer to 40 MHz. Finally, frame aggregation technology greatly reduces the average delay by packing multiple frames in a single transmission. Together, these three elements of 802.11n network technology ensure high reliability while satisfying higher throughput demands up to 300 Mbps.
Rugged industrial design
In addition to 802.11n technology, both the AWK-3131 and AWK-4131 series feature extremely rugged housing that is necessary for the harsh industrial environment the machines are often placed under. Both series also feature industrial-grade QoS and VLAN for efficient data traffic management and integrated DI/DO for on-site monitoring and warnings. The AWK-4131 is an outdoor model with a rugged IP68-rated metal housing that is designed to withstand harsh environments and extreme temperatures from -40 to 75°C.
The industrial era of wireless telemetry and radio communication Schneider Electric South Africa
Data Acquisition & Telemetry
Today’s advanced wireless telemetry offers a range of benefits that go beyond cost savings, including greater flexibility and mobility, remote monitoring capabilities, and enhanced safety.
Read more...Connecting every transport node RJ Connect
Editor's Choice Data Acquisition & Telemetry
Stockholm's bus system strategically links urban mainline, suburban mainline, non-mainline routes, community service buses and night buses. To acquire and process data from multiple sources and analyse onboard information on their moving buses, Transdev sought a dependable and powerful onboard computer. It teamed up with CatAB, Moxa’s local representative, known for delivering top-notch industrial data communication boards and equipment since 1988.
Read more...Paratus South Africa boosts Tantum IT’s connectivity with Eutelsat
Data Acquisition & Telemetry
Tantum IT is a leading IT service provider specialising in remote IT management, cloud services, and secure data handling for industries in remote and high-demand environments. To overcome its connectivity challenges, Tantum IT chose Paratus, an official distributer of Eutelsat OneWeb’s Low Earth Orbit services, to provide the solution.
Read more...Moxa launches high-bandwidth Ethernet switch portfolio RJ Connect
Fieldbus & Industrial Networking
Moxa has announced its new MRX Series Layer 3 rackmount Ethernet switches that support 64 ports with up to 16 ports of 10GbE speed to accelerate data aggregation for industrial applications.
Read more...Why battery storage is the backbone of future smart grids RJ Connect
Electrical Power & Protection
Battery energy storage systems (BESS) are becoming more and more crucial in modern smart grids as the global energy transition speeds up. Smart grids rely on them to balance and stabilise their loads.
Read more...Integrating networks in CNC machinery RJ Connect
Fieldbus & Industrial Networking
A leading global manufacturer of industrial machinery wanted to aggregate multiple applications into its CNC machines. Due to the use of different proprietary networks, integrating the networks and maintaining the components required substantial effort.
Read more...Wireless communication system for remote access to data KROHNE
Data Acquisition & Telemetry
KROHNE has introduced the OPTIBRIDGE 3880 IIoT data logger for remote data services, acquisition and evaluation. It is a fully autonomous battery- or mains- powered wireless communication system for remote access to measurement data.
Read more...Enabling multiple applications on a unified TSN network RJ Connect
Fieldbus & Industrial Networking
A leading global manufacturer of industrial machinery wanted to aggregate multiple applications into its CNC machines. Due to the use of different proprietary networks, integrating the networks and maintaining the components required substantial effort.
Read more...New industrial tablet series for non-ex applications Pepperl+Fuchs
Data Acquisition & Telemetry
Pepperl+Fuchs is introducing a rugged tablet series in accordance with MIL-STD-810H. The slim Windows-based devices are available with a 20 or 25 cm display, offering numerous customisation options and an extensive range of accessories.
Read more...New wireless communication system for remote access to measurement data KROHNE
Data Acquisition & Telemetry
KROHNE has introduced the OPTIBRIDGE 3880 IIoT data logger for remote data services, acquisition and evaluation. This is a fully autonomous, battery- or mains-powered wireless communication system for remote access to measurement data, aimed at the water and wastewater industry.
printer friendly version