The wireless sensors and system components manufactured by Industrial Interface UK allow users to connect any existing 2 wire 4-20 mA output transmitter in a full wireless network configuration. Wireless devices are also available with RTD, thermocouple and pressure transmitters, which can be battery powered or supplied from any 3-36 VDC source. Battery life is typically 2-5 years for update rates from 1 second to 1 hour.
Interfacing to any existing 2 wire 4-20 mA loop with the Z Head unit is wireless and powers the existing 2 wire system from the internal batteries. Sample times are normally from 5 to 10 minutes, but this can be taken down to seconds by introducing a solar pack to maintain battery charge. The system is suited for rotating or difficult to reach equipment, or when it is not possible to connect a 2 wire system in the measurement area.
The Z-Port ZigBee network coordinator can receive up to 1028 process variables from wireless sensors and make them available to any Ethernet or RS232/485 network. Communication protocols include standards such as Modbus RTU although any custom protocol can be programmed at the factory. The unit features a local display which can be used to obtain the current value of any of the connected sensors together with other details such as signal strength and the time since last update.
Other products in the range include the Z-200 cable replacement system and the Z-Root ZigBee router, designed to be used to extend the range of a ZigBee network.
The industrial era of wireless telemetry and radio communication Schneider Electric South Africa
Data Acquisition & Telemetry
Today’s advanced wireless telemetry offers a range of benefits that go beyond cost savings, including greater flexibility and mobility, remote monitoring capabilities, and enhanced safety.
Read more...Connecting every transport node RJ Connect
Editor's Choice Data Acquisition & Telemetry
Stockholm's bus system strategically links urban mainline, suburban mainline, non-mainline routes, community service buses and night buses. To acquire and process data from multiple sources and analyse onboard information on their moving buses, Transdev sought a dependable and powerful onboard computer. It teamed up with CatAB, Moxa’s local representative, known for delivering top-notch industrial data communication boards and equipment since 1988.
Read more...Paratus South Africa boosts Tantum IT’s connectivity with Eutelsat
Data Acquisition & Telemetry
Tantum IT is a leading IT service provider specialising in remote IT management, cloud services, and secure data handling for industries in remote and high-demand environments. To overcome its connectivity challenges, Tantum IT chose Paratus, an official distributer of Eutelsat OneWeb’s Low Earth Orbit services, to provide the solution.
Read more...Wireless communication system for remote access to data KROHNE
Data Acquisition & Telemetry
KROHNE has introduced the OPTIBRIDGE 3880 IIoT data logger for remote data services, acquisition and evaluation. It is a fully autonomous battery- or mains- powered wireless communication system for remote access to measurement data.
Read more...New industrial tablet series for non-ex applications Pepperl+Fuchs
Data Acquisition & Telemetry
Pepperl+Fuchs is introducing a rugged tablet series in accordance with MIL-STD-810H. The slim Windows-based devices are available with a 20 or 25 cm display, offering numerous customisation options and an extensive range of accessories.
Read more...New wireless communication system for remote access to measurement data KROHNE
Data Acquisition & Telemetry
KROHNE has introduced the OPTIBRIDGE 3880 IIoT data logger for remote data services, acquisition and evaluation. This is a fully autonomous, battery- or mains-powered wireless communication system for remote access to measurement data, aimed at the water and wastewater industry.
Read more...Paint curing applications in the automotive industry R&C Instrumentation
Temperature Measurement
For successful paint cure, irrespective of the paint chemistry being used, there is a critical need to measure and control the temperature of the car body as it travels through the oven. Today, paint ovens are controlled in a sophisticated fashion via thermocouples located in each zone to give constant feedback on the ambient temperature.
Read more...Programmable LED indicators Turck Banner Southern Africa
Industrial Wireless Data Acquisition & Telemetry
Turck Banner is expanding its portfolio of LED lights with the robust LED indicators of the K100 series. These units improve workflow and reduce downtime through clearly communicated status information.
Read more...Decoding the world of direct part marks Omron Electronics
Data Acquisition & Telemetry
OMRON has unveiled its latest breakthrough, the V450-H ultra-rugged handheld scanner. Tailored specifically for industrial DPM reading, this innovative device sets new industry standards for durability and performance.
Read more...Green manufacturing energy conservation and emission reduction Dahua Technology South Africa
Data Acquisition & Telemetry
As a world-leading video-centric AIoT solution and service provider, Dahua is committed to improve its sustainable development capabilities and to make continuous efforts in building a greener and safer digital world by developing innovative solutions that can help conserve energy and reduce carbon emission.
printer friendly version