Electrical Power & Protection


Efficient new solar inverters

July 2010 Electrical Power & Protection

The new Sinvert PVS device line for medium sized and large photovoltaic power plants supplements the range of solar inverters offered by the Siemens Industry Automation Division. The three phase transformer less inverters with graded power outputs of 500, 1000, 1500, and 2000 kilowatts achieve an efficiency level up to 98,4%. The top efficiency of the new inverters enables plant operators to realise a higher yield when feeding into the medium voltage grid, for instance in the case of ground mounted PV systems and systems mounted on large roofs.

The new compact Sinvert PVS central inverters are also available in photovoltaic containers, complete with medium voltage components. Using the master/slave technique it is possible not only to increase plant availability, but also to attain a longer plant service life. Furthermore, the efficiency level is higher than that of a standalone system, as the inverters can be switched in and out as required, depending on solar radiation. The efficiency of the solar plant can thus be optimised, particularly in the case of partial load operation: the plant starts up even at low solar radiation, and reaches very high efficiency levels even in the lower performance range. As the inverter sub-unit with the fewest operating hours is always controlled as the master, this enables the operating time to be evenly distributed between the inverters, which will prolong the service life of the plant.

The new Sinvert PVS inverter series can easily be integrated into scada systems through standardised communication interfaces. A graphics display with touch screen enables user-friendly local operation of the inverters and visualisation of the performance data. The new devices comply with the medium voltage guidelines of the German Association of Energy and Water Industries with all requirements including FRT (fault ride through) and active power control.

For more information contact Keshin Govender, Siemens Southern Africa, +27 (0)11 652 2412, [email protected], www.siemens.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Power supply with scalability optimised
Schneider Electric South Africa Electrical Power & Protection
Schneider Electric has introduced the Easy UPS 3-Phase Modular to the South African marketplace. This robust uninterruptible power supply (UPS) is designed to protect critical loads while offering third-party verified Live Swap functionality.

Read more...
Prioritising arc flash safety
Comtest Electrical Power & Protection
Comtest has developed a range of thermal imaging and wireless testing tools from Fluke, designed to ensure safety is the top priority for engineers working in potentially dangerous arc flash zones.

Read more...
Development of motor control units for automotive industry
Siemens South Africa IT in Manufacturing
SEDEMAC has adopted the Siemens Xcelerator portfolio of industry software, which is used in the development of its motor control units and engine control units. The motor control units are used in EVs, hybrids, ebikes and power tools, while the engine control units are used for off-road and on-road engines.

Read more...
Hot Dip Galvanizers Association shines new light on renewable energy
Electrical Power & Protection
The Hot Dip Galvanizers Association of Southern Africa plays an important role in supporting the energy value chain – which spans clean, renewable and green energy – as it powers towards key sustainability targets.

Read more...
Sustainable last-mile delivery electric trucks
Siemens South Africa IT in Manufacturing
Workhorse Group, an American technology company focused on pioneering the transition to zero-emission commercial vehicles, has adopted the Siemens Xcelerator portfolio of industrial software as it builds electric trucks for sustainable last-mile delivery.

Read more...
ACTOM supplies high-voltage equipment to wind farm project
ACTOM Electrical Machines Electrical Power & Protection
ACTOM High Voltage Equipment is currently in the process of manufacturing 400 kV and 132 kV high-voltage primary equipment for the Ummbila Emoyeni wind farm project in Mpumalanga.

Read more...
Energy measurement module for BL20 I/O System
Turck Banner Southern Africa Electrical Power & Protection
Turck’s BL20 energy measurement module enables precise monitoring of the energy consumption of single- or three-phase systems.

Read more...
Distributed energy resource management systems: a grid symphony
Schneider Electric South Africa Electrical Power & Protection
To listen to a symphony is one of the world’s great gifts. A conductor must ensure that instruments play beautifully as a whole and are kind to the ear and uplifting to the spirit yet shine in their individuality. The same can be said of a DERMS, which must effectively manage diverse energy sources to avoid compromising the grid’s integrity.

Read more...
Focus on energy sector infrastructure development can drive economic growth
Electrical Power & Protection
Post-election periods in South Africa often see a renewed focus on infrastructure development, with a specific emphasis on directing investments towards the energy sector. This strategic approach aims to accelerate economic growth, address energy challenges, and ultimately uplift the overall standard of living for the populace.

Read more...
Chocolate manufacturing with Siemens Xcelerator
Siemens South Africa IT in Manufacturing
Freybadi, one of the largest chocolate manufacturers in Indonesia and a trusted supplier of chocolate in the Asia-Pacific, Middle East and African regions, has adopted the Siemens Xcelerator portfolio of industry software to optimise its manufacturing and production processes.

Read more...