Maintenance, Test & Measurement, Calibration


Ultrafilter for environmental testing laboratories

November 2007 Maintenance, Test & Measurement, Calibration

Several final filtration cartridges for use with its Milli-Q Advantage A10 ultrapure water system have been introduced by Millipore Corporation. Each of the disposable point-of-use (POU) final filters is designed to fit the Milli-Q Advantage system's Q-POD unit. The POU filters ensure the removal of contaminants critical for specific applications just before the ultrapure water leaves the system.

The final filtration cartridges are designed to fit the          Milli-Q Advantage system’s Q-POD unit
The final filtration cartridges are designed to fit the Milli-Q Advantage system’s Q-POD unit

Making its début at Pittcon 2007, the EDS-Pak ultrafilter is the latest addition to Millipore's POU final filter range. This new unit meets the needs of researchers in environmental testing laboratories who require ultrapure water free of endocrine disrupters: the small organic molecules that impact hormonal functioning in both humans and animals. Exposure to these chemicals, which are increasingly present in the environment, may cause sterility or decreased fertility, birth defects and metabolism disorders.

Domestic and international research programmes are now focusing on the identification and evaluation of these chemicals, and are establishing common priorities to develop and validate tests and strategies. In order to obtain the detection and quantification levels needed to test for the presence of endocrine disrupters, the ultrapure water used in liquid chromatography sample and mobile phase preparation must contain a minimum of organics. While conventional water purification techniques remove the bulk of organic compounds from ultrapure water, some trace organics still may remain.

The new EDS-Pak POU activated charcoal filter has been designed to adsorb small organic molecules and dispense up to 300 total litres of ultrapure water free of endocrine disrupters. The cartridge connects to the Milli-Q Advantage system's Q-POD unit as a final purification step, either alone or in combination with a Millipak 0,22 μm filter. It has been validated in Millipore laboratories to warrant the production of ultrapure water free of bisphenol A (<5 ppt), diethyl phthalate (<0,5 ppb) and di-n-butyl phthalate (<0,5 ppb). Trace concentrations of endocrine disrupters can thus be obtained, allowing organic levels in environmental analyses to be reliably measured. Each EDS-Pak filter is delivered with a 'Certificate of Quality' from an independent laboratory, as well as a multilingual user manual.

The Millipore line of POU filters includes two other final filters: the BioPak ultrafiltration cartridge, designed to produce pyrogen- and nuclease-free ultrapure water for use in cell culture, biochemistry or molecular biology applications; and the Millipak filter with Millipore Express 0,22 μm membrane filter for the production of particulate- and bacteria-free ultrapure water in analytical applications such as spectrophotometry, spectroscopy and chromatography. All of the filters can be used as a final purification step with the Milli-Q Advantage ultrapure water system, as well as with the company's Direct-Q or Synergy water purification systems.

For more information contact Dr Errol Allcock, Microsep, +27 (0)11 553 2300, [email protected], www.microsep.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

RS PRO a key partner for planned maintenance
RS South Africa Maintenance, Test & Measurement, Calibration
RS PRO, the own-brand of RS, offers a comprehensive selection of over 80 000 products spanning all industries and technologies.

Read more...
WearCheck leads the way in condition monitoring
Wearcheck Maintenance, Test & Measurement, Calibration
Minimising maintenance costs of mining and power-generating machinery and maximising its operational efficiency – these goals form the foundation of the proactive/preventive maintenance services provided by the expert technicians at condition monitoring specialist, WearCheck.

Read more...
Collect data three times faster
SKF South Africa Maintenance, Test & Measurement, Calibration
SKF has extended its renowned Microlog Analyzer family of data collection devices with the addition of the Microlog Analyzer dBX. Currently SKF’s most powerful diagnostic tool, this cutting-edge device redefines diagnostic capabilities, enabling users to take measurements three times faster than its predecessor.

Read more...
Integrated liners for the mining industry
Maintenance, Test & Measurement, Calibration
Multotec has developed a range of composite integrated mill liners in response to the needs of local and international mining clients.

Read more...
The criticality of maintenance in the water and wastewater segment
Schneider Electric South Africa Maintenance, Test & Measurement, Calibration
In a time of water shedding, climate change and ageing infrastructure, the importance of maintenance and support in the water and wastewater segment cannot be overstated.

Read more...
How dry ice blasting is revolutionising the mining industry
Maintenance, Test & Measurement, Calibration
Dry ice blasting has emerged as a game-changing technology for the mining industry, offering a range of advantages that are reshaping traditional cleaning methods.

Read more...
Quality test tools save costs at pulp and paper mill
Comtest Editor's Choice Maintenance, Test & Measurement, Calibration
A case study on how preventive maintenance and a few good test tools avoided unnecessary motor replacements at a pulp and paper company.

Read more...
The logical solution to oil and gas industry corrosion
Maintenance, Test & Measurement, Calibration
The consequences of corrosion in the oil and gas industry can be astronomical. The simple culprit is metal reacting with oxygen and moisture, degrading it back to its natural state.

Read more...
Lube tip: foaming is affected by oil level
Wearcheck Maintenance, Test & Measurement, Calibration
In a circulating system, it is crucial to check the oil level before introducing anti-foam agents to address a foaming problem.

Read more...
Microfine filtration boosts fuel quality and reduces equipment failure
Maintenance, Test & Measurement, Calibration
The path to contamination-free fuels relies on a combined effort from refiners to transporters, storage depots, handlers and end users. Prior to use, fuels can be polished with multi-pass microfine filtration systems such as those exclusively manufactured by ISO-Reliability Partners.

Read more...