New Zone 0 head torch

April 2005 Maintenance, Test & Measurement, Calibration

Wolf Safety has launched a unique new safety head torch, powered by three AA primary alkaline cells, incorporating variable illumination levels from a choice of three, five and seven 'everlasting' high intensity LEDs, selected by a rubber pushbutton on the lens rim.

The Wolf HT-200 'Zone 0' Head torch is CE marked to the ATEX Directive and also IECEx Scheme Certified, so that it can be used throughout Europe, and other countries including the USA, Australia, Canada, Russia and South Africa.

Approved to Category 1 for use in Group II applications, zones 0, 1 and 2 potentially explosive gases, vapours and mists, where T4/T3 temperature class permits, the HT-200 is moulded in high impact strength antistatic plastic with a coated lens to provide scratch resistance and antistatic properties.

Using the maximum seven high output white LEDs; the wide-angle beam of this head torch offers a light duration of 50 hours at full brightness and a light output of 114 lux at a distance of one metre. With an ingress protection level of IP54, the Wolf HT-200 is supplied with a fabric/elastic headband with an optional rubber helmet band for hardhat use.

Further reading:

WearCheck leads the way in condition monitoring
Wearcheck Maintenance, Test & Measurement, Calibration
Minimising maintenance costs of mining and power-generating machinery and maximising its operational efficiency – these goals form the foundation of the proactive/preventive maintenance services provided by the expert technicians at condition monitoring specialist, WearCheck.

Read more...

---

Collect data three times faster
SKF South Africa Maintenance, Test & Measurement, Calibration
SKF has extended its renowned Microlog Analyzer family of data collection devices with the addition of the Microlog Analyzer dBX. Currently SKF’s most powerful diagnostic tool, this cutting-edge device redefines diagnostic capabilities, enabling users to take measurements three times faster than its predecessor.

Read more...

---

Integrated liners for the mining industry
Maintenance, Test & Measurement, Calibration
Multotec has developed a range of composite integrated mill liners in response to the needs of local and international mining clients.

Read more...

---

The criticality of maintenance in the water and wastewater segment
Schneider Electric South Africa Maintenance, Test & Measurement, Calibration
In a time of water shedding, climate change and ageing infrastructure, the importance of maintenance and support in the water and wastewater segment cannot be overstated.

Read more...

---

How dry ice blasting is revolutionising the mining industry
Maintenance, Test & Measurement, Calibration
Dry ice blasting has emerged as a game-changing technology for the mining industry, offering a range of advantages that are reshaping traditional cleaning methods.

Read more...

---

Quality test tools save costs at pulp and paper mill
Comtest Editor's Choice Maintenance, Test & Measurement, Calibration
A case study on how preventive maintenance and a few good test tools avoided unnecessary motor replacements at a pulp and paper company.

Read more...

---

The logical solution to oil and gas industry corrosion
Maintenance, Test & Measurement, Calibration
The consequences of corrosion in the oil and gas industry can be astronomical. The simple culprit is metal reacting with oxygen and moisture, degrading it back to its natural state.

Read more...

---

Lube tip: foaming is affected by oil level
Wearcheck Maintenance, Test & Measurement, Calibration
In a circulating system, it is crucial to check the oil level before introducing anti-foam agents to address a foaming problem.

Read more...

---

Microfine filtration boosts fuel quality and reduces equipment failure
Maintenance, Test & Measurement, Calibration
The path to contamination-free fuels relies on a combined effort from refiners to transporters, storage depots, handlers and end users. Prior to use, fuels can be polished with multi-pass microfine filtration systems such as those exclusively manufactured by ISO-Reliability Partners.

Read more...

---

Supporting capital investment in machinery
Maintenance, Test & Measurement, Calibration
Industrial and mining operations are under increased financial pressure in the current economic and social climate in South Africa. This means that when businesses make capital investments in new equipment, they need to be sure that the machinery will function optimally for as long as possible.

Read more...

---