Enclosures, Cabling & Connectors


AS-i modules for wet areas

December 2004 Enclosures, Cabling & Connectors

The new AS-i ProcessLine modules from IFM electronic have been especially designed for use in areas where extreme cleaning conditions prevail or where stainless steel boxes would have been used to cover the AS-i modules. The stainless steel sensors, connection cables, I/O modules and insulation displacement connectors feature IP69K protection rating, suitable for use in the food or mining industry. They can be mounted directly in wet areas and are easily wired and set-up. Recently, the ProcessLine range received the international 'reddot design' award.

Previously, stainless steel control cabinets have been used in the plant as directly usable field modules were not available. This caused additional cost for construction, mounting and installation. The ProcessLine series is an optimum choice as a direct field module for use in the production cleaning process as bacteria cannot attack the hygienic and circular designed housing.

With their inclined bases, the ProcessLine modules can be fixed so that no drops can form on the upper side. All process connections are through M12 connectors and are sealed using special O-rings. Two LEDs indicate communication error and overload conditions during set-up and operation, and this information can be evaluated by the AS-i master at any time.

ProcessLine modules can be addressed before mounting using the addressing unit via the M12 connector without voltage being applied. Addresses in the range 1A-31A and 1B-31B can be assigned. An optional addressing function can be made online via the AS-i Controller-E family. With their integrated display, the modules can be addressed manually or automatically in the easy start-up mode.

The modules are suitable for a wide range of different applications and are suitable for use in the food, mining, brewery, dairy, pharmaceutical, chemical and process industries. They allow 62 modules at one bus cable and diagnosis is via the AS-i master/PLC. Mounting requires only one screw and replacement is quick if servicing is required.

For more information contact Andrew Kerr, Shorrock Automation, 012 345 4449, [email protected], www.shorrock.co.za





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Cables and wires for food and beverage
LAPP Southern Africa Enclosures, Cabling & Connectors
The strict hygiene regulations for handling foodstuffs stipulate particularly complex requirements for electrical components. The cables and accessories used must withstand a wide range of chemical, thermal and mechanical loads, and also function perfectly at all times in refrigerated and damp rooms.

Read more...
Redefining mobility for fibre cabling
Legrand Enclosures, Cabling & Connectors
As data volumes rapidly increase globally, specialists need to take an urgent look at IT and network infrastructure, with a particular focus on vital equipment like servers, racks and fibre cabling. The Legrand team believes that advanced fibre cabling solutions, which have been developed to simplify deployment, lower costs, improve performance and enable greater densities, will efficiently meet future capacity demands.

Read more...
High-speed data transmission
Enclosures, Cabling & Connectors
Data protocols are constantly evolving to enable interoperability and reliable transfer of increasing amounts of data at the highest speeds between more and more connected devices. To address this technological challenge, Fischer Connectors is expanding its platform capabilities to meet the most demanding connectivity requirements for high-speed data transfer.

Read more...
Robust Ethernet cordset cables
Turck Banner Southern Africa Enclosures, Cabling & Connectors
Turck Banner offers a product range comprising a wealth of different connectors and cables, including over 115 000 connection technology solutions with differing degrees of complexity.

Read more...
What you need to know when you start using hydrogen as your fuel source
Parker Hannifin - Sales Company South Africa Enclosures, Cabling & Connectors
OEMs are taking a more serious look at hydrogen options. Although much of the market is still focused on the potential of battery-powered vehicles, hydrogen fuel cell vehicles offer a viable supplement that is better suited for longer ranges and faster refuelling.

Read more...
SEW-EURODRIVE closes the loop with complete panel solutions
SEW-EURODRIVE Enclosures, Cabling & Connectors
In addition to its quality range of geared motors and related solutions, SEW-EURODRIVE South Africa is ‘closing the loop’ of its products by offering customers electrical control panels as part of the package.

Read more...
Simplify control panel connections
Turck Banner Southern Africa Enclosures, Cabling & Connectors
Panel builders have new tools for bringing power and signals back into protected areas with Turck Banner’s M8 and M12 receptacles.

Read more...
Control cabinet-free automation
Beckhoff Automation Enclosures, Cabling & Connectors
As a replacement for the conventional control cabinet, the MX-System from Beckhoff offers some major efficiency advantages. It also provides a great deal of optimisation potential in terms of the increasing shortage of skilled workers and the expanding presence of DC supply networks across the industry.

Read more...
Cable protection for longer runs
igus Enclosures, Cabling & Connectors
Polymer energy chain manufacturer, igus has introduced a new lighter weight e-chain for cable management and protection applications with large unsupported lengths and high fill weights. This was previously the domain of larger, more expensive energy chains.

Read more...
Panel building should be streamlined
Schneider Electric South Africa Enclosures, Cabling & Connectors
Data centres run critical applications, and require equipment and infrastructure that operate at 100% uptime, as any downtime due to faulty components could have catastrophic ramifications.

Read more...