Combined current and overvoltage arrester

Electrical Power & Protection

November 2004 Electrical Power & Protection Products & Solutions Smart Home Automation

The DEHNventil TT is a combined Class I lightning current arrester and Class II overvoltage arrester providing the same level of protection where previously up to 20 devices had to be installed and connected. The compact unit requires only 30% of the space of similar devices and no de-coupling inductance coils are necessary between the Class I and Class II arresters.

Easily installed in different types of power supply systems, DEHNventil TT makes calculations unnecessary. Its discharge capability meets protection level 1 in accordance with SABS, IEC, EN and VDE standards, the highest requirements of lightning protection at present. It is capable of protecting equipment, even in the case of a lightning strike with an intensity of 200 kA (10/350).

By using the encapsulated spark gap technology, safety distances to adjacent components within the distribution cabinet are unnecessary. Even at fault currents up to 25 kARMS a 35 A fuse will not trip when DEHNventil TT extinguishes the follow on current.

The combined current and overvoltage arrester has no leakage current. This allows direct use of the device upstream of the meter, and when testing the insulation, no disconnection is required. DEHNventil TT is compatible with other surge arresters in the DEHN RED/LINE family.

By using the twin terminals, connection is easy and inductive volt drop across long connection cables is avoided. An additional bus bar terminal at the output increases the combination possibilities with other DIN rail mounted components. LED indication is provided, or if required, the optional DEHNsignal DV remote monitoring module informs the user on the state of the protection, even when he is not on site.

All DEHNventil devices have an additional earth terminal. This allows a safe connection to the main earth bar as well as short connection to the protective earth conductor of the power supply system.

For more information contact Paul Van As, Surge Technology, 011 792 1303, [email protected], www.surgetek.co.za

Share this article:

World’s fastest 14-bit arbitrary waveform generator
Vepac Electronics Electrical Power & Protection
The ARB Rider AWG-7000 is the world’s fastest 14-bit arbitrary waveform generator, with a 20 GS/s real time update rate and 14-bit vertical resolution. Thanks to Simple Rider software, it offers best-in-class performances and an easy to use interface.

Read more...

Steam on demand
Electrical Power & Protection
Rental boilers are increasingly popular, offering the convenience of on-demand power and heat without the commitment of a permanent installation. They are an ideal solution while a customer awaits repairs, or only needs a boiler for a particular period, or does not have the capital to invest upfront.

Read more...

High-voltage backup power solutions
Electrical Power & Protection
Businesses are facing increasing pressure to rethink their approach to power. As a result, there’s been a significant uptick in interest in high-voltage installations, either as standalone battery energy storage systems, or as solar installations feeding into battery storage.

Read more...

Rotary friction welding – a first for Tutuka power station
Electrical Power & Protection
Steinmüller Africa has successfully used rotary friction welding in a project with engineering consultant, eNtsa. This innovative technique was applied to fabricating four headers used for high-pressure water heater boiler units installed at Tutuka power station in Mpumalanga.

Read more...

Why it is vital to size soft starters carefully
WEG Africa Electrical Power & Protection
The application of soft starters has become a well-established strategy to improve the uptime and lifespan for motors and mechanical equipment driven by motors, but they need to be chosen carefully.

Read more...

Changeover switch between two power supplies
Schneider Electric South Africa Electrical Power & Protection
Schneider Electric South Africa has unveiled the Resi9 Changeover Switch product range which provides the perfect solution to switch manually between two power supplies or circuits.

Read more...

Partial discharge monitoring solution for MV switchgear
Schneider Electric South Africa Electrical Power & Protection
Schneider Electric South Africa has unveiled its PowerLogic PD100 Partial Discharge Monitoring Solution, designed to be installed on MV switchgear to detect anomalies early, to prevent unplanned downtime.

Read more...

ABB production site reduces total emissions by 80%
Electrical Power & Protection
Continuing its commitment to sustainable manufacturing, ABB’s Mexican production site for load centres and safety switches in Saltillo has reduced emissions by 80% in the past two years.

Read more...

Electrical Power & Protection

Combined current and overvoltage arrester

Further reading:

Published by Technews