Stack gas analyser for hot/wet analysis
November 2000
Analytical Instrumentation & Environmental Monitoring
Ametek's 910 mass emission analyser uses the 920 stack gas analyser for the analysis of SO2. It maintains the sample above the water dewpoint and analyses on a hot/wet basis. An important fact is that the velocity/flow is measured on an in-situ hot/wet basis, and as the mass emission is a product of these two values, the measurement base must be the same.
This method of extractive analysis is commonly referred to as hot/wet analysis. That is, the sample is extracted from the process and kept above the sample dew point throughout the sample transport and analysis. There is no dilution or drying of the sample; keeping the sample above the dewpoint not only refers to water but also to acid dewpoints - the sample system is capable of maintaining a sample temperature of up to 180°C or removing the acid at the SCU. This means sample integrity is maintained and any plugging or fouling is minimised.
The 900 Series analysers use hollow cathode lamps, which emit characteristic lines of UV radiation. The positions of these lines are determined by the cathode metal, their wavelength centres being known to a high degree of accuracy. Since these bands are extremely narrow, they facilitate excellent linearity, accuracy and precision in absorbance measurements, independent of variations in bandpass filtering.
Separate reference and measurement paths are part of the photometer design. Light from the source lamp is split into two separate beams through the use of a beam splitter. One beam passes through clean air, the other through the gas sample. Both beams impinge on separate PMTs (reference and measure).
The sample cell is made of stainless steel, using a folded path configuration, providing for the photometer to be mounted outside of the oven in the electronics cabinet. At one end of the sample cell, a reflector block returns the photometer illumination back to the detector section through a thermal isolation tube. Ametek is represented locally by OEN Enterprises.
Further reading:
Oxygen measurement in beverages
Analytical Instrumentation & Environmental Monitoring
[Sponsored] Anton Paar offers a complete range of oxygen measurement instruments for total package oxygen (TPO) measurements, at-line quality control (QC), and in-process monitoring. These instruments help beverage manufacturers achieve accurate, reliable oxygen control at every stage of production.
Read more...
Analysers achieve OIML R140/MID accuracy class A certification
Analytical Instrumentation & Environmental Monitoring
Qmicro by Sensirion has received the OIML R140/MID accuracy class A certificate No. TC12537 for its DynamiQ-X GC analysers for the analysis of natural gas and natural gas blended with hydrogen.
Read more...
Sustainable water management
Wearcheck
Analytical Instrumentation & Environmental Monitoring
Water sustainability is critical for the future wellbeing of people, land and marine ecosystems, and socio-economic development. WearCheck Water provides a range of water analysis techniques to determine water quality for various sectors, including mining, agriculture, domestic and the healthcare industry.”
Read more...
Biofilm monitoring system
Instek Control
Analytical Instrumentation & Environmental Monitoring
Alvim, through Instek Controls, provides innovative, high-tech solutions for biofilm and biofouling monitoring in industrial plants.
Read more...
WearCheck Water earns AdBlue/DEF analysis accreditation
Wearcheck
Analytical Instrumentation & Environmental Monitoring
WearCheck Water recently became the first laboratory in Africa to be officially ISO17025 accredited to test AdBlue diesel exhaust fluid by the South African National Accreditation System.
Read more...
Streamlining strain gauge load cell integration
Vepac Electronics
Analytical Instrumentation & Environmental Monitoring
Vepac’s data acquisition hardware provides an efficient and effective all-in-one solution for customers looking to simplify, enhance and optimise their strain gauge load cell systems.
Read more...
Oxygen measurement in beverages
Anton Paar
Analytical Instrumentation & Environmental Monitoring
[Sponsored] Anton Paar offers a complete range of oxygen measurement instruments for total package oxygen (TPO) measurements, at-line quality control (QC), and in-process monitoring. These instruments help beverage manufacturers achieve accurate, reliable oxygen control at every stage of production.
Read more...
Sensors and controls for food, beverage and pharmaceutical
Instek Control
Analytical Instrumentation & Environmental Monitoring
Included in Instek Control’s range is Anderson-Negele, which has adopted ‘Hygienic By Design’ as its guiding principle, with a particular focus on meeting the stringent regulatory requirements found in industries such as dairy, brewery or pharmaceutical.
Read more...
Vertical labelling of test tubes in clinical laboratories
Omron Electronics
Analytical Instrumentation & Environmental Monitoring
Werfen has implemented a new automated machine for the supply of reagents to drug toxicology laboratories, built by MACCO in collaboration with OMRON and Marini Pandolfi. It uses OMRON SCARA robots and advanced vision systems to ensure reagent quality through vertical handling and labelling process of test tubes.
Read more...
Keeping a close eye on product quality and purity
Endress+Hauser South Africa
Analytical Instrumentation & Environmental Monitoring
Colour measurements are necessary in many processes to avoid product losses and ensure safe production and batching.
Read more...
printer friendly version