Stack gas flow monitor
June 2004
Flow Measurement & Control
Durag's D-FL-100 measuring system continuously determines the flow velocity and the flow rate of the exhaust gas. Alarm levels are pre-selectable and any alarms will be indicated inertia-free, permitting necessary interventions in the plant control system so as to comply with prescribed emission limit values.
Operating on the principle of differential pressure, the D-FL 100 units are available in two types. The D-FL 100-I is designed for flow measuring without temperature and pressure compensation and the D-FL 100-II for flow measuring with temperature and pressure compensation. The probe has two separate chambers, between which a pressure difference, caused by the flow in the duct, builds up. The differential pressure at the probe is proportional to the square of the gas speed.
The volume flow can be converted from operational to standard conditions by the D-FL 100-10 microprocessor evaluation unit. For this purpose, two additional current inputs (0 to 20 mA) for a temperature probe and a pressure probe have been provided at the evaluation unit. If an emission evaluation computer is available, the evaluation unit is not required.
Special designs are available for use in aggressive exhaust gases. A hastelloy flow probe is recommended for heating power plants, chemical plants and in paper manufacturing. For operating temperatures of over 600°C, an inconel flow probe is available.
The lengths of measuring ranges offered are 400 mm to 2 m, 2 to 4 m or 4 m. Exhaust gas temperature over the exhaust gas dew point is up to 320°C. An automatic backflow purging feature is available as an option.
For more information contact Noel Bauchop, OEN Enterprises, 011 675 4447, [email protected], www.oenenterprises.co.za
Further reading:
Radiometric density measurements
Mecosa
Flow Measurement & Control
Radiometric density measurements are used wherever conventional measurement techniques fail. Successful applications can be found in a wide variety of industries, especially where harsh process environments and difficult measuring conditions prevail.
Read more...
Battery-powered magmeter
Flow Measurement & Control
The RWEM/D battery-powered electromagnetic flow meter from Royce Water Systems is ideal for water and wastewater systems located at remote sites.
Read more...
Precise process and maximum savings with VEGABAR
VEGA Controls SA
Flow Measurement & Control
Accurate measurementsof differential pressure is crucial for safety, efficiency and optimising operational processes. For over 40 years, VEGA has supplied industry-leading pressure measurement solutions, establishing itself as a trusted expert with a proven track record in sensor technology.
Read more...
Innovative solutions for low flow dosing with high precision
Mecosa
Flow Measurement & Control
n the food, pharma, and chemical manufacturing industries, precision and efficiency are of utmost importance. Bronkhorst High-Tech has developed a flexible solution that meets today’s requirements for highly accurate dosing, whether continuous, in ratio, or in batches.
Read more...
Battery-powered magmeter
Flow Measurement & Control
The RWEM/D battery-powered electromagnetic flow meter from Royce Water Systems is ideal for water and wastewater systems located at remote sites.
Read more...
Smart technology for municipal services
VEGA Controls SA
Flow Measurement & Control
A new wave of smart technologies has emerged from VEGA Instruments, promising a revolutionary impact on the efficiency and dependability of municipal services.
Read more...
Sustainable journey with hydrogen
Mecosa
Flow Measurement & Control
Bronkhorst High-Tech, the Dutch leader in flow measurement and control, has been focusing on hydrogen applications in the renewable energy market for some time, and for good reason.
Read more...
Optimise sludge treatment and reduce operational costs
Endress+Hauser South Africa
Flow Measurement & Control
The Endress+Hauser inline measuring devices, the Proline Teqwave MW 300 and the Proline Teqwave MW 500, determine the total solids content of wastewater directly through microwave transmission.
Read more...
No more blind spots in flow measurement of liquid foods
ifm - South Africa
Flow Measurement & Control
The SM Foodmag magnetic-inductive flow sensor takes the flow measurement of liquid and creamy foods to a new level.
Read more...
Plant signal conditioning
Omniflex Remote Monitoring Specialists
Flow Measurement & Control
Often, plant managers have a deep understanding of all the key operational challenges facing their facility, and have a broad knowledge of the instrumentation that can help solve them. However, they might not always be aware of the latest innovations that can make their lives even easier.
Read more...
printer friendly version