May 2003Flow Measurement & Control
Products & Solutions
Flocare has extended its range of flow rate indicators to include a Flow-Mon Miniflo unit for very low flows. Suitable for both liquid and gas applications, the Miniflo operates efficiently down to 50 cc/min and up to 5 litre a minute calibrated flow, with a maximum pressure tolerance of 13 MPa (130 bar).
The unit can have up to four signal switches, to a Zone 1 explosion-proof compliance if required, or the switches can be air operated for use in areas with extremely hazardous conditions.
Thirteen such air operated Miniflo units have been installed in a Russian refinery to control the flow of methanol at 12 MPa (120 bar).
Built-in features of the Flow-Mon range include inline design, a non-return feature and the advantage that it cannot be strained on cold start-up. As far as mechanical function is concerned, a fixed, tapered needle passing through an orifice in the face of a piston completely seals the port-to-port connection when the piston is seated. As flow commences, the piston is displaced against a 28 kPa differential spring and moves over the tapered section of the needle, thus permitting flow through the orifice. Only the needle taper configuration needs to be changed to accommodate any specified viscosity and maximum flow requirement, thus the full deflection of the unit can be used for all applications.
Piston movement is mechanically linked to a shaft, which is rotated to a degree exactly representing piston displacement and, therefore, flow through the orifice.
The shaft passes out of the unit wall into a switch box, where it carries a field-adjustable cam, to operate up to four micro-switches. A pointer on the shaft gives visual indication of flow.
Accuracy is not affected by orientation, so the unit can be mounted in any plane. For fine manual control of flow, a needle valve may be fitted to the outlet port, and this - in conjunction with the flow read out, provides a simple, accurate means of setting maximum flows through the line.
For more information contact Norman Moul, Flocare, 011 701 3455, [email protected]
Radiometric density measurements Mecosa
Flow Measurement & Control
Radiometric density measurements are used wherever conventional measurement techniques fail. Successful applications can be found in a wide variety of industries, especially where harsh process environments and difficult measuring conditions prevail.
Read more...Battery-powered magmeter
Flow Measurement & Control
The RWEM/D battery-powered electromagnetic flow meter from Royce Water Systems is ideal for water and wastewater systems located at remote sites.
Read more...New fire blanket for lithium-ion battery fires
Fire & Safety Products & Solutions
SafeQuip launched its newly developed range of high-performance, multi-use lithium-ion battery fire blankets, specifically designed to address fires involving devices with lithium-ion batteries, providing a crucial tool for safety in environments where these batteries are in use.
Read more...SafeQuip launches lithium-ion battery fire extinguishers
Fire & Safety Products & Solutions
[Sponsored] SafeQuip has launched the SANS 1910-2022 approved Lith-Ex fire extinguisher range, which carries NTA 8133:2021 (KIWA/POOO55865) test approval, which proves its lithium-ion battery fire extinguishing capability.
Read more...Watermist suppression in mining FS Systems
Fire & Safety Mining (Industry) Products & Solutions
Watermist suppression systems are highly effective in suppressing flames and controlling heat spread, especially in confined spaces commonly found in mining environments, by generating fine droplets with an increased surface area, enabling rapid heat absorption and cooling during fire incidents.
Read more...FS partners with Oculus FS Systems
Fire & Safety Products & Solutions
FS Systems announced a strategic partnership with Oculus Innovations to combine the company’s integrated security management solutions with Oculus Innovations’ expertise in designing state-of-the-art control room environments.
Read more...Precise process and maximum savings with VEGABAR VEGA Controls SA
Flow Measurement & Control
Accurate measurementsof differential pressure is crucial for safety, efficiency and optimising operational processes. For over 40 years, VEGA has supplied industry-leading pressure measurement solutions, establishing itself as a trusted expert with a proven track record in sensor technology.
Read more...Quality fire detection installation at Baywear Clothing G2 Fire
Fire & Safety Industrial (Industry) Products & Solutions
JZL Projects and Solutions was asked to provide a comprehensive yet cost-effective and reliable fire detection solution for Baywear Clothing that would be installed with minimum disruption to the factory.
Read more...Innovative solutions for low flow dosing with high precision Mecosa
Flow Measurement & Control
n the food, pharma, and chemical manufacturing industries, precision and efficiency are of utmost importance. Bronkhorst High-Tech has developed a flexible solution that meets today’s requirements for highly accurate dosing, whether continuous, in ratio, or in batches.
Read more...Battery-powered magmeter
Flow Measurement & Control
The RWEM/D battery-powered electromagnetic flow meter from Royce Water Systems is ideal for water and wastewater systems located at remote sites.
printer friendly version