Mass Measurement


Sartorius’ digital weighbridge load cell

May 2014 Mass Measurement

The digital Pendeo Truck load cell is a great solution for weighbridges that takes the performance of Sartorius products to the next level and makes the calibration, setup and operation of weighing systems easier and more reliable.

The digital transfer signal is even less susceptible to faults and ensures precise, reliable operation at all times. Thanks to its identical height, the Pendeo Truck is 100% compatible with the company’s other analogue models. Replacement is thus possible without any technical changes to the installation kit or weighbridge.

Easy to install

In combination with the Combics Pro Terminal, the new digital Pendeo Truck load cell makes full use of its strengths. The automatic function identifies all connected load cells and the parameters for the calibration are already saved in the device. This eliminates the need of entering load cell data. Equally easy is the allocation of load cells to their position under the weighbridge. This saves a lot of time in troubleshooting. In this generation of load cells, Sartorius continues to use its PR 6221 model, which has proven itself over many years in thousands of road vehicle weighbridges.

Reliable operation

Thanks to the expanded diagnostic functions, the Combics Pro and Pendeo Truck ‘team’ offers enhanced reliability for error free operation. All data can be displayed at any time simply by pressing a key. The overall system gives the measurement chain maximum resistance against lightning strikes. All components that are installed directly on the weighing platform comply with the requirements of the highest protection classes IP68/69k. Other features include:

* Fully compatible with PR 6221.

* Special strain-gauge technology for improved lightning protection.

* Maintenance free.

* Compact design.

* Suitable for use in ATEX zone 2/22.

* Robust design.

* Hermetically sealed.

* Stainless steel housing.

* High overload range (up to 150%).

* Quick stabilisation.

* Short weighing times.

* High EMC compatibility (10 V/m).





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Non-nuclear slurry density meter
Allpronix Mass Measurement
Allpronix will be showcasing the Rhosonics Non-Nuclear Slurry Density Meter (SDM) at Stand F501. The density meter helps mineral processing plants to replace nuclear density gauges with ultrasonic technology, ...

Read more...
Interface force measurement
Action Instruments SA Mass Measurement
Interface’s load button cells are designed to provide the most accuracy in as little space as possible. Diameters range from 2,5 to 7,6 cm, with heights from 1 to 3,8 cm. The shaped load button has a ...

Read more...
High-performance compact pressure sensors
Transducer Technology Mass Measurement
The Gems 3000 series pressure sensors are ideal for systems that require consistently high levels of performance, reliability and stability. The sputtered thin film diaphragm offers unbeatable price performance ...

Read more...
New series of metric roller bearings
Bearing Man Group t/a BMG Mass Measurement
BMG’s bearings portfolio extends from precision miniature bearings used in machine tools and electronics applications to giant-size bearings that meet high demands in steel and mining. This range has ...

Read more...
A new era of mass flow control
Mecosa Mass Measurement
The Flexi-Flow is a revolutionary instrument that not only allows you to measure and control gas flow and measure the temperature, but also to measure and control the upstream and downstream pressures in your process with one flexible instrument.

Read more...
Load sensor for force measurement
Instrotech Level Measurement & Control Mass Measurement
The instrument provides a solution for non-intrusive level measurements of materials that are subject to uneven build-up, bridging or sidewall collection.

Read more...
Make bin level sensors redundant
DRH Components Mass Measurement
Today it is critical to know and understand inventory down to the last unit in order to be efficient.

Read more...
Belt conveyor weighing applications
Loadtech Load Cells Mass Measurement
Loadtech’s LT1320 is a precision digital indicator for belt weighing applications. The unit takes the weight and speed information from a belt conveyor system and accurately calculates the rate and total ...

Read more...
Positive displacement vs Coriolis meters
Soliflo Mass Measurement
Positive displacement (PD) is a practical and accurate method to achieve volumetric measurement of refined hydrocarbons, according to tests undertaken by Brodie International in the USA.

Read more...
Ultra-compact weighing electronics
Siemens South Africa Mass Measurement
Siwarex WP351 is Siemens’ newest solution for intelligent weighing automation. Measuring 20 mm width by 65 mm height, the module is one of the smallest weighing electronics units available. The device’s ...

Read more...