Data Acquisition & Telemetry


Banner's SureCross wireless system: a new wireless horizon - sensing unplugged

September 2008 Data Acquisition & Telemetry

SureCross is optimised for a wide range of challenging sensing and control applications with superior reliability, security and deterministic response capabilities.

To satisfy the performance demands for reliable sensing and actuation, Banner has re-invented wireless. The SureCross wireless network is the first wireless platform built from the ground up for industry – featuring proprietary RF design, including power management (with solar and battery options), designed to deliver robust remote monitoring and control capabilities. The flexibility of the SureCross network allows users to add a host of monitoring and control capabilities across widespread areas and to reach inaccessible areas, without new conduit, wiring runs and associated labour and downtime.

The Banner SureCross Wireless System is a radio device network with integrated I/O that can operate in extreme environments. The system uses frequency hopping spread spectrum (FHSS) transmission methods to minimise radio interference and operates in the 2,4 GHz frequency band where no individual radio licence is required. SureCross accommodates both digital and analogue I/O in a single unit and features bidirectional communication between Gateway and Nodes.

The DX70 is a preconfigured wireless I/O solution between two locations – offering plug-and-play installation, consisting of a pair of configured Gateway and Node modules with direct I/O mapping. Each module is equipped with four discrete (sourcing) inputs and outputs and two analog inputs and outputs including a link loss output, in case the radio signal is lost.

The DX80 consists of a Gateway controller and one or more Nodes – where the Gateway can act as a master device in a star topology, autonomously controlling input to output mapping or as a Modbus Slave in a host control system using RS485 Modbus RTU.

The DX91 is a wireless solution for hazardous locations with the same topology as the DX80 system.

Characteristics

The Banner SureCross Wireless Network features the following:

* An all-in-one packaged wireless solution with plug-and-play functionality.

* Purpose-built system for sensing designed and built by the sensor leader.

* Digital and analog I/O in a single unit.

* 900 MHz and 2,4 GHz models to meet global communications standards.

* Compact, self-contained modules in a rugged, IP67/NEMA 6 design.

* Bidirectional Rx/Tx communication.

* Direct connectivity to Modbus RTU RS485 and RS232 serial communications, and other industrial protocols.

* Integrated LCD display, LED status indicators and push-button/menu-driven configuration (no PC required to configure).

* Versatile mounting and wiring options with readily accessible wiring terminals.

* Embedded Site Survey feature ensures optimal device location and peak RF performance.

* Advanced power management for both communications and sensors.

* Flexible power options including FlexPower battery module, line power or solar power.

Applications

The SureCross Wireless Network operates in extreme environments while eliminating the need for costly wiring runs, making it ideal for a broad range of factory and process applications, including the following:

* Motor temperature monitoring and control in a high-friction environment.

* Rotating machinery data acquisition.

* Remote monitoring of towers or tank farms.

* Assembly line error proofing.

* Dairy bulk tank temperature and humidity monitoring.

* Barn ventilation and air flow monitoring.

* Detection of water tank levels in ethanol plants.

* Municipal water monitoring for multiple data points.

* Loading dock occupancy monitoring for traffic management.

* Train car location monitoring and marshalling in train yards.

* Physical plant energy monitoring and management.

* Storage room security and access monitoring;

* Retail traffic flow and consumer habits analysis.

* Parking ramp payment kiosk access and control.

* Refrigerated storage system temperature monitoring.

For more information contact Rodney Topham, RET Automation, +27 (0)11 453 2468, [email protected], www.retautomation.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Condition monitoring to go
Turck Banner Southern Africa Fieldbus & Industrial Networking
Anyone who wants to efficiently monitor the climate in control cabinets will find a comprehensive range of control cabinet monitors for the DIN rail in Turck Banner’s cabinet condition monitoring family.

Read more...
The industrial era of wireless telemetry and radio communication
Schneider Electric South Africa Data Acquisition & Telemetry
Today’s advanced wireless telemetry offers a range of benefits that go beyond cost savings, including greater flexibility and mobility, remote monitoring capabilities, and enhanced safety.

Read more...
Energy measurement module for BL20 I/O System
Turck Banner Southern Africa Electrical Power & Protection
Turck’s BL20 energy measurement module enables precise monitoring of the energy consumption of single- or three-phase systems.

Read more...
Compact UHF RFID reader with integrated Ethernet interface
Turck Banner Southern Africa Industrial Wireless
Online teaser: Turck Banner’s Q150 UHF RFID reader has an integrated Ethernet interface. The IP67 reader communicates directly with PC or PLC systems in industrial Ethernet networks having the four most important protocols, without the need for an additional interface.

Read more...
Connecting every transport node
RJ Connect Editor's Choice Data Acquisition & Telemetry
Stockholm's bus system strategically links urban mainline, suburban mainline, non-mainline routes, community service buses and night buses. To acquire and process data from multiple sources and analyse onboard information on their moving buses, Transdev sought a dependable and powerful onboard computer. It teamed up with CatAB, Moxa’s local representative, known for delivering top-notch industrial data communication boards and equipment since 1988.

Read more...
Paratus South Africa boosts Tantum IT’s connectivity with Eutelsat
Data Acquisition & Telemetry
Tantum IT is a leading IT service provider specialising in remote IT management, cloud services, and secure data handling for industries in remote and high-demand environments. To overcome its connectivity challenges, Tantum IT chose Paratus, an official distributer of Eutelsat OneWeb’s Low Earth Orbit services, to provide the solution.

Read more...
Powerful measuring sensor with two new modes
Turck Banner Southern Africa Sensors & Transducers
Turck Banner has launched two new modes in the Q2X series of miniature photoelectric sensors: laser measurement and fixed-field.

Read more...
Simplify condition monitoring with one gateway
Turck Banner Southern Africa Industrial Wireless
By seamlessly integrating wired and wireless devices, Turck Banner’s DXM1200-X2 brings condition monitoring to every part of a facility: easy-to-access areas, hard-to-reach places, and everywhere in between, including harsh environments with an IP67-rated housing.

Read more...
Efficiently consolidate analogue signals and reduce wiring
Turck Banner Southern Africa Fieldbus & Industrial Networking
Control engineers can bring analogue signals into a control system more efficiently with the new R95C 8-port analogue input to modbus hub.

Read more...
Farewell to a family legacy
Turck Banner Southern Africa News
The birth of RET Automation was more than just the inception of a company; it was the beginning of a family legacy rooted in innovation, dedication and an unwavering commitment to excellence. Now, as the curtain is about to fall on this remarkable era with Brandon Topham’s impending retirement, it is time to reflect on a family legacy that spans four decades.

Read more...