News


Nick Denbow’s European report: Wind power, process plant safety and sensors

May 2018 News

March saw the North of Europe suffering the ‘Beast from the East’, with freezing Siberian wind and rain, plus snow – even in the south of the UK. The high winds brought an unexpected benefit: the power generated by the many UK wind turbines reached 14 GW, or 34% of the UK power demand, during several periods. The wind power capacity installed feeding the UK grid is now 19 GW, the third highest in Europe: Germany has 56 GW and Spain 23 GW.

Safety concerns in process plants

The major concerns for Saudi Arabia are the continuing cyber-attacks. More information is emerging about the Triton malware attack, reported in this column in February. The latest news, published on the Cyberscoop and CyberArk websites, suggest the Triton attacks failed because of a ‘flaw in the coding of the malware’.

Because of the sophisticated nature of the malware and because many of the coding indicators have not been seen before, or used by any known hacking group, the conclusion is still that extensive resources were involved in creating and testing Triton, which could only have been provided by a nation state. Saudi Aramco assisted in the investigations, but say the plant attacked by this virus was not a part of their operations. Triton is confirmed to be specifically targeting the Triconex safety override systems, in an overt attempt to cause catastrophic damage.

The Schneider Triconex controllers are used in about 18 000 plants around the world, including nuclear and water treatment facilities, oil and gas refineries, and chemical plants. The reports also revealed that attacks in Saudi Arabia using the Shamoon virus have continued, with Sadara Chemicals and the Saudi National Industrialisation Company (Tasnee) both being attacked last year.

In the USA, the impression is that major plant incidents fall into three main categories: dust explosions, maintenance welding errors and transport pipeline fractures. Their 10 year average for grain dust explosions is 9,3, so actually 2017 was below average with only seven explosions and five fatalities in the USA. The number is steadily declining, as better training and housekeeping take effect, and with the wider use of dust explosion venting and suppression systems.

It is my personal impression that maintenance welding errors seem to be a major cause of the plant and tank explosions reported in the USA, firstly during maintenance under hot work permits, but also in plant changes, when working on tanks where flammable materials were previously stored.

Despite this apparent laxity in grain handling and petrochemical plant operations, the US has a world leading accident investigation organisation, the Chemical Safety (and Hazard Investigation) Board. The CSB was established in 1998, and produces brilliant accident analysis reports, covering small hazardous events up to major disasters. They are the people that are responsible for detailing the causes of the major BP Texas City refinery explosions in 2005, and the Macondo blowout in 2010, both of which caused major loss of life.

The CSB can only make recommendations for legislative changes, which then have to be considered by OHSA and US State legislative bodies. Perhaps typically, president Trump promised to abolish the CSB when he came to office last March, presumably thinking it was a barrier to free enterprise etc., but thankfully he seems to have changed his mind!

New developments in sensors

Returning to sensors and the current development trends, it seems there is no specific focus for developments currently. Perhaps because of the US accidents with pipeline leaks and fractures, there is considerable attention being paid to corrosion and crack monitoring, but the development of point sensors seems to not be relevant for long pipelines.

At the University of California San Diego, a new ultrasonic sensor array has been built onto a flat silicone elastomer sheet, which can be wrapped round bends and corners that otherwise are difficult to inspect with flat probes. Initial applications are seen on structural steel in bridges, or for aircraft engine supports.

In Europe, Achema has launched its brochures in advance of the 11-15 June expo in Frankfurt: the last event was in 2015. Focused on process engineering for chemicals, pharmaceuticals and petrochemicals, maybe Achema will show the future routes of sensor development – notably however, cybersecurity and safety from hazards are not major topics in their agenda.

Nick Denbow spent 30 years as a UK-based process instrumentation marketing manager, and then changed sides – becoming a freelance editor and starting Processingtalk.com. Avoiding retirement, he published the INSIDER automation newsletter for five years, and then acted as their European correspondent. He is now a freelance Automation and Control reporter and newsletter publisher, with a blog on www.nickdenbow.com





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Reinstatement opportunity for ECSA registration
News
In 2023 the Engineering Council of South Africa (ECSA) announced a special opportunity for engineers in South Africa to reinstate their registration status if it had been cancelled. This exclusive offer is available until the end of August 2024.

Read more...
SA company uses AI to break the language barrier
News
Helm has a unique approach to AI that allows it to automate customer communication in any of South Africa’s 11 official spoken languages.

Read more...
From ground to compound: the journey of crude oil
Wearcheck News
You’re in for a ‘crude awakening’ when you download WearCheck’s latest Technical Bulletin. You will be treated to an in-depth explanation of the processes of producing oil, fuel and other petrochemical wonders that power our modern lifestyle.

Read more...
2025 – a year for growth, amid industry challenges
News
Automation is rapidly emerging as a catalyst for industrial transformation, enabling businesses to meet sustainability targets, enhance productivity and drive economic efficiency.

Read more...
Come and meet Pepper, the friendly humanoid robot
SAIMC News
Pepper, the friendly humanoid robot, is ready to welcome visitors at the SAIMC/SA Instrumentation & Control stand for an interactive glimpse into the future of robotics.

Read more...
SA Instrumentation & Control
Technews Publishing (SA Instrumentation & Control) News
Published by Technews Publishing, SA Instrumentation & Control is South Africa’s premier ABC-audited information source for instrumentation, systems and automation solutions in southern Africa.

Read more...
Welcome to Africa Automation Technology Fair 2025
News
AATF 2025 returns bigger and better, delivering cutting-edge automation solutions, expert industry insights and world-class networking opportunities.

Read more...
Win a PROFIBUS Installer with Troubleshooting course
Industrial Data Xchange (IDX) News
Join us at AATF for a chance to win a certified PROFIBUS Installer with Troubleshooting course.

Read more...
From the editor's desk: Something completely different
Technews Publishing (SA Instrumentation & Control) News
The Africa Automation Technology Fair is around the corner, and RX Global is ramping up its efforts to make the 2025 exhibition one to remember. More information can be found in their advertisement ...

Read more...
KwaZulu-Natal Industrial Technology Exhibition helps drive economic growth
News
The upcoming Africa Automation Technology Fair will bring together industry leaders, policymakers and innovators to chart Africa’s automation future.

Read more...