System Integration & Control Systems Design


Powerful embedded PC automates recycling processes

April 2017 System Integration & Control Systems Design

Garbage recycling and conversion into biogas are major contributors toward environmental protection. However, multiple truck trips to collect waste from separate bins for different materials release more harmful CO2 into the atmosphere. Swedish equipment maker, Envac Optibag has developed a solution that is as simple as it is intelligent. In communities that use the Optibag concept, household waste is presorted into colour-coded plastic bags, which are deposited in the same container and hauled off. In the waste processing plant, the bags are then sorted by colour with a fully automated, camera-based system and routed to the appropriate recycling facility.

Waste avoidance and recycling concepts often fail because they are difficult to implement and/or are rejected by consumers. In other words, the easier it is to put a concept into practice, the more successful it will be. Envac Optibag built Sweden’s first optical waste sorting system in 1990. Since then, rising interest in environmental responsibility has created a growing international market for the company, which is part of Sweden’s Envac Group.

The concept is quite simple: Participating households receive garbage bags in different colours for different kinds of waste, such as green for compost, red for paper, blue for composite materials, and so forth. All bags wind up in the same chute or container and are picked up by the same truck. Once they arrive at the waste processing plant, they are dumped onto conveyor belts and routed to the camera systems. The cameras read the colour of each bag, and a mechanical ejector pushes the bags onto the appropriate conveyor belt, which takes it to a container or directly to a processing facility. Each line processes approximately nine tons of garbage per hour.

Flexible expandability built-in

Envac Optibag selected a CX2040 Embedded PC as the central control platform of the automated bag sorting facility, EtherCAT as the communication system, and TwinSAFE to implement safety functionality. The mechanical ejectors are also managed via a CX2040 that controls safety I/O components and AX5118 Servo Drives. The openness and expandability of the PC-based control platform ensure that stricter waste incineration guidelines or substantially higher volumes can be accommodated without the need for additional conveyor belts.

Waste separation in milliseconds

Christian Toräng, R&D manager at Envac Optibag, sees the company’s choice of an Embedded PC and EtherCAT Servo Drives as a strategic decision that will greatly simplify future projects: “We have been working with Beckhoff since 2004 and appreciate the openness of the PC-based control system, as well as the ease of integration with other components. We can easily add new systems that operate with other protocols, and make these changes at no extra cost. The CX2040 provides additional benefits compared to other control systems we used in the past. The time necessary to identify the bags and mechanically separate them has been substantially reduced to only 240 milliseconds, which represents a 30% improvement. This kind of speed is particularly important for large systems or municipalities that must handle huge amounts of garbage. The fact that existing system capacity can be increased as garbage volumes rise is a significant benefit.” The R&D manager also sees advantages for future installations in large metropolitan areas: “Accelerating the separation process reduces the need for parallel systems to handle large volumes. That’s why our motto ‘twice the performance in half the space’ is so important for city planners.”

Embedded PC integrates camera system for optical recognition

While past camera systems required separate controllers, the job can now be handled by a single, centralised PC-based platform. “The quad-core processor in the CX2040 is so powerful that the optical separation system, the PLC and the HMI can all run on one device, enabling much easier installation and operation. You no longer need to set up separate network components, so the installation itself is much easier and faster. Another benefit is the fact that the CX2040 provides a standardised programming environment. This makes things easier not only for us, but also for the consultants we work with in various phases of each project. And since the systems are connected to the Internet, we can monitor them remotely. For example, we can troubleshoot components down to the motor level over the Internet via a special communication module,” explains Christian Toräng.

For more information contact Kenneth McPherson, Beckhoff Automation, +27 (0)11 795 2898, [email protected], www.beckhoff.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Innovative separation of recyclable materials
Beckhoff Automation Fieldbus & Industrial Networking
A plant built by Belgian specialist machine builder, Absolem Engineering features an innovative process for separating recyclable materials. Using PC-based control from Beckhoff, a major problem has been elegantly solved - the generation of different signal sequences for the exact synchronisation of different camera systems.

Read more...
Open control system for retrofit of conveyor control system
Beckhoff Automation Editor's Choice
For every online retailer, warehouse logistics is part of the critical infrastructure. An Australian office equipment supplier has retrofitted the warehouse logistics installation of its central warehouse, and replaced the proprietary decentralised controllers of the conveyor lines with PC-based control from Beckhoff, based on powerful EtherCAT communication.

Read more...
PC-based control for advanced hydrogen storage technology
Beckhoff Automation Editor's Choice PLCs, DCSs & Controllers
The proportion of renewable energies from solar, wind and water is rising continuously. However, sufficient storage options are of the essence to use these energies as efficiently as possible. GKN Hydrogen offers a particularly compact and safe option, low-pressure metal hydride hydrogen storage systems with PC-based control from Beckhoff.

Read more...
The time is now for systems integrators
Editor's Choice System Integration & Control Systems Design
Integrators combine sophistication regarding technology innovation with practical, hands-on experience. Collaborating with systems integrators is the means to significant productivity improvement, powered by the convergence of automation and information and operations technology.

Read more...
Modular assembly platform for clean manufacturing
Beckhoff Automation PLCs, DCSs & Controllers
JR Automation delivers custom automated solutions for numerous industries. It has done this through its scalable, modular automation platform, FlexChassis, which speeds up time to market while cutting costs. The company chose the XTS linear transport system from Beckhoff because of its speed, and modular design that allows for multiple configurations.

Read more...
Automation of a thermoforming machine for recyclable packaging
Beckhoff Automation IT in Manufacturing
Renewable cellulose is an excellent alternative, which is why Hamer has joined forces with Beckhoff to develop a thermoforming machine for water-based cellulose pulp.

Read more...
System integrators are a diverse market
Editor's Choice System Integration & Control Systems Design
System integrators (SIs) combine expertise on emergent technologies with real world experience. Working with SIs, it’s inevitable that at some point someone will say, “We’re not a typical SI.” And in many ways, it’s true. SIs come in all shapes and sizes.

Read more...
Avoiding the pitfalls of PLC and scada control system integration
Iritron System Integration & Control Systems Design
Upgrading your control system by integrating PLCs with scada systems should be a simple seamless process. Regrettably, the industry is plagued with control system integration and upgrade myths and misconceptions that can lead to liability issues, project delays, cost overruns and decreased plant performance.

Read more...
EtherCAT measurement terminals for vehicle development at Mercedes-Benz
Beckhoff Automation System Integration & Control Systems Design
At the Mercedes Technology Centre plant in Sindelfingen, Germany, car axles are examined with the highest precision on four test benches, in parallel with road tests and simulations. All data is acquired using PC-based control from Beckhoff.

Read more...
Loop signature 23: Tuning Part 2.
Editor's Choice System Integration & Control Systems Design
It is my opinion that most tuning methods are very crude. They do of course also offer a starting point for tuning if one is not fortunate enough to have a sophisticated tuning package like a Protuner around.

Read more...