Compact and flexible – Gemü 3030 mFlow
September 2015
Flow Measurement & Control
The Gemü 3030 mFlow operates reliably with conducting media in the temperature range of 0 – 135°C with a supply voltage of 24 VDC and an automatic adaptation of the measuring range (0-4 m/s or 0-10 m/s). The ambient temperature should not exceed 60°C or fall below 0°C.
The magnetically inductive flowmeter can be used up to a maximum operating pressure of 10 bar, as thanks to the low installation depth of the sensor, there is only a negligible loss in pressure. Flow velocities of 0,1-10 m/s are measured independent of process pressure, temperature and viscosity.
Simple connection to the plant control system
The system is connected electrically using standard connectors which are fitted to the back of the flowmeter (5-pin M12 connectors) making it easy to connect electrically without opening the housing.
The Gemü 3030 mFlow can be optimally integrated in fully automatic plant control systems using standard signals (analogue output 4-20 mA and pulse output 24 VDC) to transmit the flow rate to higher-level plant systems and interfaces such as the RS-232 and Profibus DP. Status information, error messages and the operating range can be displayed via two visual indicators, which also indicate the status of the Profibus connection.
Fast and uncomplicated commissioning
In addition to the uncomplicated and fast installation of the Gemü 3030 mFlow, commissioning is simple, with versatile operating facilities, for example using the fascia buttons with illuminated display, PC connection with Internet browser and fieldbus interfaces. No special software is required for browser operation, as this is already integrated in the device.
For more information contact Claudio Darpin, Gemü Valves Africa, +27 (0)11 462 7795, [email protected], [email protected], www.gemu-group.com
Further reading:
Radiometric density measurements
Mecosa
Flow Measurement & Control
Radiometric density measurements are used wherever conventional measurement techniques fail. Successful applications can be found in a wide variety of industries, especially where harsh process environments and difficult measuring conditions prevail.
Read more...
Battery-powered magmeter
Flow Measurement & Control
The RWEM/D battery-powered electromagnetic flow meter from Royce Water Systems is ideal for water and wastewater systems located at remote sites.
Read more...
Precise process and maximum savings with VEGABAR
VEGA Controls SA
Flow Measurement & Control
Accurate measurementsof differential pressure is crucial for safety, efficiency and optimising operational processes. For over 40 years, VEGA has supplied industry-leading pressure measurement solutions, establishing itself as a trusted expert with a proven track record in sensor technology.
Read more...
Innovative solutions for low flow dosing with high precision
Mecosa
Flow Measurement & Control
n the food, pharma, and chemical manufacturing industries, precision and efficiency are of utmost importance. Bronkhorst High-Tech has developed a flexible solution that meets today’s requirements for highly accurate dosing, whether continuous, in ratio, or in batches.
Read more...
Battery-powered magmeter
Flow Measurement & Control
The RWEM/D battery-powered electromagnetic flow meter from Royce Water Systems is ideal for water and wastewater systems located at remote sites.
Read more...
Smart technology for municipal services
VEGA Controls SA
Flow Measurement & Control
A new wave of smart technologies has emerged from VEGA Instruments, promising a revolutionary impact on the efficiency and dependability of municipal services.
Read more...
Sustainable journey with hydrogen
Mecosa
Flow Measurement & Control
Bronkhorst High-Tech, the Dutch leader in flow measurement and control, has been focusing on hydrogen applications in the renewable energy market for some time, and for good reason.
Read more...
Optimise sludge treatment and reduce operational costs
Endress+Hauser South Africa
Flow Measurement & Control
The Endress+Hauser inline measuring devices, the Proline Teqwave MW 300 and the Proline Teqwave MW 500, determine the total solids content of wastewater directly through microwave transmission.
Read more...
No more blind spots in flow measurement of liquid foods
ifm - South Africa
Flow Measurement & Control
The SM Foodmag magnetic-inductive flow sensor takes the flow measurement of liquid and creamy foods to a new level.
Read more...
Plant signal conditioning
Omniflex Remote Monitoring Specialists
Flow Measurement & Control
Often, plant managers have a deep understanding of all the key operational challenges facing their facility, and have a broad knowledge of the instrumentation that can help solve them. However, they might not always be aware of the latest innovations that can make their lives even easier.
Read more...
printer friendly version